by certex1 | Nov 28, 2023
Eliminates Costly Down Time With Lift After Lift, Built-In Dependability Ease of Use — Designed so bail stands up while chain rests on floor, there is no wrestling with the bail for hook-up. Balanced Loading — Three point suspension offers superior stability...
by Rachel Shaffer | Nov 28, 2023
by Rachel Shaffer | Nov 28, 2023
by Rachel Shaffer | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by Rachel Shaffer | Nov 28, 2023
• These Bridle Sling assemblies are used on lifts that need multiple legs and come equipped with many variations of rings, hooks and other fittings. • 3 and 4 legged assemblies available on request. • Because of the wide variety of fittings which can greatly affect...
by Rachel Shaffer | Nov 28, 2023
• These Bridle Sling assemblies are used on lifts that need multiple legs and come equipped with many variations of rings, hooks and other fittings. • 3 and 4 legged assemblies available on request. • Because of the wide variety of fittings which can greatly affect...
by Rachel Shaffer | Nov 28, 2023
• These Bridle Sling assemblies are used on lifts that need multiple legs and come equipped with many variations of rings, hooks and other fittings. • 3 and 4 legged assemblies available on request. • Because of the wide variety of fittings which can greatly affect...
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
Note: Not limited to Single Chain Sling Applications
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by Rachel Shaffer | Nov 28, 2023
These Load Balancing slings serve the same purpose as the Cargo type slings except they are more economical due to the reduced capacities. Also the eyes are smaller to fit the smaller hoist hooks. Wider widths available on request.
by certex1 | Nov 28, 2023
by certex1 | Nov 28, 2023
by Rachel Shaffer | Nov 28, 2023
These wide body slings are used in a basket hitch only where wider slings are needed for better load stability. These wider slings distributes the load over a larger sling surface area and also offer great protection over smooth and soft surfaces. Standard widths from...
by Rachel Shaffer | Nov 28, 2023
These are the most durable of all web slings. The complete sling, both sides, are covered with a buffer web for the maximum abrasion resistance, including the eyes. Eye configuration allows for tight choking also great for vertical and basket hitches.
by Rachel Shaffer | Nov 28, 2023
by certex1 | Nov 28, 2023
The Lewis Snake Grip expands or contracts to grip different or identical cable and/or rope sizes as per the customer’s needs. SAVE time stringing up, changing and unstringing because the snake requires no special tools. The swivel and swing link go smoothly through...
by certex1 | Nov 28, 2023
Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Forged jaw ends are fitted with bolts and nuts for 1/4” through 5/8”, and pins and cotters on 3/4” through...
by racheldshaffer@gmail.com | Nov 27, 2023
by racheldshaffer@gmail.com | Nov 27, 2023
The Nylite Snatch Block maximizes a two-part lifting system without over stressing synthetic rope. The exclusive high-strength sheave reduces weight while providing the proper radius and groove shape to eliminate rope wear. The swivel plate has a locking bolt that...
by racheldshaffer@gmail.com | Nov 27, 2023
Easily installed into or removed from a premade soft eye. Nylite spool is only 1/7th the weight of steel. Connectors will not deform or rupture from repeated loadings. The shackle takes advantage of the high-strength Nylite connector and synthetic rope. • Working...
by certex1 | Nov 27, 2023
Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Turnbuckle eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2 1/2”, a...
by certex1 | Nov 27, 2023
Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Turnbuckle eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2 1/2”, a...
by certex1 | Nov 27, 2023
Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4” through 2 1/2”, a...
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
by Rachel Shaffer | Nov 27, 2023
End fittings are steel or aluminum designed to be used in only a vertical or basket hitch.
by Rachel Shaffer | Nov 27, 2023
End fittings are steel or aluminum with a slip through design which provides good choke hitching. Also can be used in vertical or basket hitches. Available in Nylon or Polyester Webbing.
by Rachel Shaffer | Nov 27, 2023
• Green Marking • Common Applications: Equipment Transport, Heavy Hauling & Steel Coil Transport • Design Factor 3:1
by Rachel Shaffer | Nov 27, 2023
• Red Marking • Common Applications: Equipment Transport, Heavy Towing & Steel Coil Transport • Design Factor 3:1
by Rachel Shaffer | Nov 27, 2023
• Blue Marking • Common Applications: Light Equipment Transport & Logging • 3:1 design factor
by Rachel Shaffer | Nov 25, 2023
• Hot Dip Galvanized • Quenched & Tempered Meets the performance requirements of Federal Specifications RR-C-271D, Type VII, Class 3, except for those provisions required of the contractor. 401, 402 and 403 swivels are positioning devices and are not intended to...
by Rachel Shaffer | Nov 25, 2023
• A rugged rope thimble recommended for heavy duty service. • Also available in Stainless Steel.
by Rachel Shaffer | Nov 25, 2023
• Recommended for light duty service. • Hot Dip galvanized Steel.
by Rachel Shaffer | Nov 25, 2023
• Hot Dip Galvanized • Quenched & Tempered • Meets the performance requirements of Federal Specifications RR-C-271D, Type VII, Class 1 except for those provisions required of the contractor.
by Rachel Shaffer | Nov 25, 2023
• Hot Dip Galvanized • Quenched & Tempered
by certex1 | Nov 24, 2023
Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE...
by certex1 | Nov 24, 2023
by certex1 | Nov 24, 2023
The No. 83 Casing Thimble has been designed for the oil industry. The Choker Thimbles, No. 82, No. 84, No. 85, No. 86 and No. 87 are designed especially for braided choker slings. The ears can be peened over to retain wire rope.
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Designed to swivel under load. • All swivels individually proof tested with certification. • All hooks furnished with latches assembled. • All jaws complete with bolts, nuts and cotter pins. • Pressure lube fitting provided. • NOT TO BE USED ON DEMOLITION (WRECKING)...
by Rachel Shaffer | Nov 24, 2023
• Stainless steel construction with cadmium plated steel nuts. • Shipped packaged and unassembled. • Instructions included for easy field assembly See full Warnings & Application Instructions for the Crosby® Positive Locking Flapper...
by Rachel Shaffer | Nov 22, 2023
• Heavy duty latch with easy operating features. • Hot Dip galvanized. • Flapper lever indicates locked or unlocked position. • Assembly instructions included with each latch. • Meets the intent of OSHA Rule 1926.550 (g) (when secured with the bolt, nut and pin) for...
by Rachel Shaffer | Nov 22, 2023
S-4320 Latch Kits shipped unassembled and individually packaged with instructions. Replacement Latch Kit for New 320N Hooks • Heavy duty stamped latch interlocks with the hook tip. • High cycle, long life spring. • Can be made into a “Positive Locking” Hook when...
by Rachel Shaffer | Nov 22, 2023
• Forged Alloy Steel — Quenched and Tempered. • Deep straight throat permits efficient handling of flat plates or large cylindrical shapes. • The long tapered point allows easy grab in rings, pear links, eye bolts or lifting holes.
by Rachel Shaffer | Nov 22, 2023
• Forged Carbon Steel Meets the performance requirements of Federal Specification RR-C-271D, Type V, Class 6, except for those provisions required of the contractor.
by Rachel Shaffer | Nov 21, 2023
• Forged Carbon Steel — Galvanized.
by Rachel Shaffer | Nov 21, 2023
• Forged Carbon Steel — Quenched and Tempered. • Pressed steel latches and stainless steel springs, bolts and nuts. • For replacement latch kit, order Stock No. 9900299.
by Rachel Shaffer | Nov 21, 2023
• Forged Alloy Steel — Quenched and Tempered
by Rachel Shaffer | Nov 21, 2023
This hook is designed to choke a secure hold on a load in position. A latch prevents the eye of the sling from disengaging from the hook. Sizes available 3/8” thru 3/4”. Latch Kits Available
by Rachel Shaffer | Nov 21, 2023
NEWCO sliding hooks afford faster handling on factory made slings for handling pipe, logging, machinery, and in stevedoring. Its free movement permits rapid adjustment of the sling to varying sized loads. “Saddle is rounded to minimize wear” Hook opening is large...
by Rachel Shaffer | Nov 21, 2023
NEWCO sliding hooks afford faster handling on factory made slings for handling pipe, logging, machinery, and in stevedoring. Its free movement permits rapid adjustment of the sling to varying sized loads. “Saddle is rounded to minimize wear” Hook opening is large...
by Rachel Shaffer | Nov 21, 2023
• Forged Alloy Steel — Quenched and Tempered. • Individually Proof Tested at 2-1/2 times the Working Load Limit with certification. • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. • Easy to operate with enlarged...
by Rachel Shaffer | Nov 21, 2023
• Forged Alloy Steel — Quenched and Tempered. • Individually Proof Tested at 2-1/2 times the Working Load Limit with certification. • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. • Easy to operate with enlarged...
by Rachel Shaffer | Nov 20, 2023
View Warnings & Application Instructions for Crosby® Eye Hooks. • Forged — Quenched and Tempered. • Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. • Every Crosby Swivel hoist...
by Rachel Shaffer | Nov 20, 2023
View Warnings & Application Instructions for Crosby® Eye Hooks. See Replacement Latch Kits for Crosby® Hooks.
by Rachel Shaffer | Nov 20, 2023
The most complete line of shank hoist hooks. Available 3/4 to 300 tons. Available in carbon steel, alloy steel, and bronze. Quenched and Tempered Proper design, careful forging, and precision controlled quench and tempering give maximum strength without excessive...
by Rachel Shaffer | Nov 17, 2023
by Rachel Shaffer | Nov 17, 2023
by Rachel Shaffer | Nov 17, 2023
by Rachel Shaffer | Nov 16, 2023
View 7 x 19 Clear Vinyl Coated Galvanized Cable Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 16, 2023
View the 7 x 7 x 19 Cable-Laid Wire Rope. Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 15, 2023
Home / / Page 12 1-Part Slings/Swaged Socket Category: Uncategorized Description Related products X100® Grade 100 Master Link X100® Grade 100 Clevis Sling Hook with Latch Galvanized Aircraft...
by Rachel Shaffer | Nov 15, 2023
by Rachel Shaffer | Nov 15, 2023
Multi-part braided slings are fabricated by taking a single long length of rope and braiding it back & forth along the entire design length, including the eyes, to form a single high-capacity sling. These braids achieve capacities & flexibility far greater...
by Rachel Shaffer | Nov 15, 2023
by Rachel Shaffer | Nov 15, 2023
by Rachel Shaffer | Nov 15, 2023
by Rachel Shaffer | Nov 15, 2023
MULTI-PART BRAIDED SLINGS are wire rope slings fabricated by taking a single long length of aircraft cable or IWRC wire rope and braiding it back and forth along the entire sling design length, including the sling eyes, to form a single, high-capacity sling....
by Rachel Shaffer | Nov 14, 2023
by Rachel Shaffer | Nov 14, 2023
Vertical,Choker, and Vertical Basket Hitch Ratings in the chart below.
by Rachel Shaffer | Nov 12, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope Selection Rotation Resistant Wire...
by Rachel Shaffer | Nov 12, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope Selection Rotation Resistant Wire...
by Rachel Shaffer | Nov 12, 2023
Longer Rope Life: The smooth periphery of Dyform-6 reduces bearing pressures which gives longer rope life and lessdown time. The Dyform process increases the steel surface area by 100%. This increased surface area gives higher abrasion resistance, thus reducing...
by Rachel Shaffer | Nov 12, 2023
• Strongest of all ropes in the Rotation Resistant product range – confirmed by Bridon’s “Powercheck” testing of a sample from each production length. • Greatest resistance to rotation of all ropes in the Rotation Resistant product range – confirmed by Bridon’s...
by Rachel Shaffer | Nov 12, 2023
Characteristics: Compacted strands with outside and inside strands laid in opposite directions for superior rotation resistance. Can be used for multiple part lifting. Dyform-18 has up to 35% greater strength than conventional 19 x 7 EIP wire rope. Technical...
by Rachel Shaffer | Nov 10, 2023
Characteristics: Inner and outer strands are laid in opposing directions to counter rotation. More easily damaged in service than other ropes. Can be used for multiple part lifting. Technical Resources: Design & Construction Operation & Maintenance Matching...
by Rachel Shaffer | Nov 9, 2023
Characteristics: Inner strands are left lang lay; outer strands are right regular lay; the natural rotation tendency of one layer is balanced by the other. Not recommended for multiple part lifting. Technical Resources: Design & Construction Operation &...
by Rachel Shaffer | Nov 9, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 9, 2023
View 7 x 7 Clear Vinyl Coated Galvanized Cable Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 9, 2023
View the 7 x 7 x 7 Cable-Laid Wire Rope Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 9, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 9, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
by Rachel Shaffer | Nov 8, 2023
Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
