Certex Logo

Categories

7 x 7 Clear Vinyl Coated Galvanized Cable

CERTEX Cat. Ref. No. Cable Diameter Coated to Approx. Weight per 1000 ft. Pounds Breaking Strength Pounds* Construction
CX01-0211 1/16″** 1/8″ 11.8 480 7 × 7
CX01-0212 3/32″** 1/8″ 18.5 920 7 x 7
CX01-0213 3/32″** 3/16″ 25.8 920 7 x 7
CX01-0214 1/8″ 3/16″ 35.2 1,700 7 × 7

Also available on special order: nylon and vinyl in various colors.
Approx. 3 weeks delivery.

* Listed for comparison only. Actual operating loads may vary, but should never exceed 20% of catalog Breaking Strength.

** Uncoated cable according to MIL-W-83420D, with exceptions.

Uncoated cable meets Federal Specification RR-W-410D.

NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information here.

When using wire rope clips with plastic coated cable, match clip size to uncoated cable diameter (3/16″ cable coated to 1/4″ takes 3/16″ clip.) Strip plastic coating off cable where clips will be positioned for full holding power.

WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Low-Headroom Multiple-Spread Lifting Beam Model 20

Caldwell Low-Headroom Multiple-Spread Lifting Beam Model 20

Versatility is the name of the game with the Model 20 Low-Headroom Multiple-Spread Lifting Beam. Used across the country in manufacturing and industrial applications, it's a favorite on construction sites, too. With a few dozen standard spreads, lengths and...

Caldwell High-Capacity Spreader Beam Model 30HC

Caldwell High-Capacity Spreader Beam Model 30HC

Capacity and spread configurations are virtually limitless. The chart highlights sizes available from 50 to 130 tons. Review our complete high-capacity spreader beam chart, starting at 5 tons. Product Features: Unique pivoting lower lugs allow for 75-90 degree lower...

Caldwell Girder Clamps Model GC

Caldwell Girder Clamps Model GC

Choose from three lifting capacities: 15, 20, or 25 tons. For lifting and positioning structural beams. Can be used in pairs in conjunction with a spreader beam for additional stability. For vertical lifting only. Product Features: These clamps provide an efficient...