Leading the lifting & rigging industry
Certex Logo

Categories

Crosby® Shank Hooks

Crosby® Shank Hooks
  • The most complete line of shank hoist hooks. Available 3/4 to 300 tons.
  • Available in carbon steel, alloy steel, and bronze.
  • Quenched and Tempered
  • Proper design, careful forging, and precision controlled quench and tempering give maximum strength without excessive weight and bulk.
  • Every Crosby Shank Hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on following pages. Even years after purchase of the original hook, latch assemblies can be added.
  • Load Rating code stamped on each hook.

EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

Working Load Limit* (tons) Hook Identification Code Shank Hooks Stock No. Shank** Length Type Weight Each (lbs.)
Carbon Alloy Bronze 319-C 319CN 320-C 320-CN 322-C 319-A 319AN 320-A 320AN 322-A 319-BN CERTEX Cat. Ref. No. Crosby Carbon S-319-C S-319CN S.C. CERTEX Cat. Ref. No. Crosby Alloy S-319-A S-319AN S.C. CERTEX Cat. Ref. No. Crosby Bronze S-319-B S.C.
3/4 1 .5 DC DA DB CX05-0001 †1028505 CX05-0020 †1028701 CX05-0044 †1028900 Std. .50
1 1-1/2 .6 FC FA FB CX05-0002 †1028514 CX05-0021 †1028710 CX05-0045 †1028909 Std. .75
1-1/2 2 1 GC GA GB CX05-0003 †1028523 CX05-0022 †1028723 CX05-0046 †1028918 Std. 1.00
2 3 1.4 HC HA HB CX05-0004 †1028532 CX05-0023 †1028732 CX05-0047 †1028927 Std. 1.82
3 5 2 IC IA IB CX05-0005 †1028541 CX05-0024 †1028741 CX05-0048 †1028936 Std. 3.69
5 7 3-1/2 JC JA JB CX05-0006 †1028550 CX05-0025 †1028750 CX05-0049 †1028945 Std. 7.25
7-1/2 11 5 KC KA KB CX05-0007 †1028563 CX05-0026 †1028765 CX05-0050 †1028954 Std. 13.49
10 15 6-1/2 LC LA LB CX05-0008 †1028572 CX05-0027 †1028774 CX05-0051 †1028963 Std. 18.00
15 22 10 NC NA NB CX05-0009 †1028581 CX05-0028 †1028783 CX05-0052 †1028972 Std. 35.33
20 30 — OC OA — CX05-0010 1024386 CX05-0029 1024803 — — Std. 72.00
20 30 — OC OA — CX05-0011 1024402 CX05-0030 1024821 — — Long 85.50
25 37 — PC PA — CX05-0012 1024420 CX05-0031 1024849 — — Std. 134.00
25 37 — PC PA — CX05-0013 1024448 CX05-0032 1024867 — — Long 172.00
30 45 — SC SA — CX05-0014 1024466 CX05-0033 1024885 — — Std. 182.00
30 45 — SC SA — CX05-0015 1024484 CX05-0034 1024901 — — Long 214.00
40 60 — TC TA — CX05-0016 1024509 CX05-0035 1024929 — — Std. 268.00
40 60 — TC TA — CX05-0017 1024545 CX05-0036 1024965 — — Long 312.00
50 75 — UC UA — CX05-0018 1024563 CX05-0037 1024983 — — Std. 390.00
50 75 — UC UA — CX05-0019 1024581 CX05-0038 1025009 — — Long 426.00
— 100 — — WA — — — CX05-0039 1025027 — — Std. 610.00
— 100 — — WA — — — CX05-0040 1025045 — — Long 675.00
— 150 — — XA — — — CX05-0041 1025063 — — Std. 735.00
— 200 — — YA — — — CX05-0042 1025081 — — Std. 1020.00
— 300 — — ZA — — — CX05-0043 1025090 — — Std. 1390.00

** See column “Y” on next page for actual length. † New 319N Style Hook.
Hook I.D. Codes: A—Alloy Steel, B—Bronze High Strength, C—Carbon Steel.
* NOTE: Proof load is 2 times Working Load Limit. All carbon hooks—average straightening load (ultimate load) is 5 times
Working Load Limit. Alloy eye hooks 1 ton through 22 ton—average straightening load (ultimate load) is 5 times Working
Load Limit. Alloy eye hooks 30 tons through 60 tons—average straightening load (ultimate load) is 4.5 times Working Load
Limit. Alloy Shank Hooks 1 ton thru 22 ton—average straightening load (ultimate load) is 5 times the Working Load Limit.
Alloy Shank hooks 30 ton through 300 ton ultimate load is 4.5 times the Working Load Limit. All Bronze hooks—average
straightening load (ultimate load) is 4 times Working Load Limit.

SEE APPLICATION AND WARNING INFORMATION

quic-check QT logo

Dimensions (inches)
Hook I.D. Code D F G H J K L M O P R T X†† Y Z Deformation Indicator AA
D 2.86 1.25 .73 .81 .93 .63 5.14 .63 † .93 1.96 2.35 .97 .59 2.06 .69 1.50
F 3.16 1.38 .84 .94 .97 .71 5.68 .71 † .97 2.22 2.59 .97 .66 2.25 .78 2.00
G 3.59 1.50 1.00 1.16 1.06 .88 6.35 .88 † 1.06 2.44 2.76 1.03 .72 2.59 .88 2.00
H 4.00 1.62 1.14 1.31 1.19 .94 7.14 .94 † 1.16 2.78 3.16 1.16 .88 2.84 1.00 2.00
I 4.84 2.00 1.44 1.63 1.50 1.31 8.63 1.13 † 1.41 3.47 3.85 1.53 1.16 3.34 1.25 2.50
J 6.28 2.50 1.82 2.06 1.78 1.66 10.43 1.44 † 1.69 4.59 4.77 1.94 1.41 3.84 1.56 3.00
K 7.54 3.00 2.26 2.63 2.41 1.88 12.52 1.63 † 2.22 5.25 5.88 2.46 1.81 4.38 1.94 4.00
L 8.34 3.25 2.60 2.94 2.62 2.19 13.47 1.94 † 2.41 5.96 6.37 2.59 2.00 4.50 2.19 4.00
N 10.34 4.25 3.01 3.50 3.41 2.69 16.65 2.38 † 3.19 6.88 8.14 2.81 2.56 5.50 2.63 5.00
O 13.62 5.00 3.62 4.62 4.00 3.00 23.09 — 3.25 8.78 9.44 3.44 3.12 10.00 3.12 6.50
O 13.62 5.00 3.62 4.62 4.00 3.00 31.09 — 3.25 8.78 9.44 3.44 3.12 18.00 3.12 6.50
P 14.06 5.38 4.56 5.00 4.25 3.62 32.12 — 3.00 11.38 12.56 3.88 4.00 15.00 4.00 7.00
P 14.06 5.38 4.56 5.00 4.25 3.62 41.12 — 3.00 11.38 12.56 3.88 4.00 24.00 4.00 7.00
S 15.44 6.00 5.06 5.50 4.75 3.72 34.12 — 3.38 12.63 14.00 4.75 4.00 15.00 4.00 8.00
S 15.44 6.00 5.06 5.50 4.75 3.72 43.12 — 3.38 12.63 14.00 4.75 4.00 24.00 4.00 8.00
T 18.50 7.00 6.00 6.50 5.75 4.44 36.06 — 4.12 14.81 15.50 5.69 4.50 14.50 4.50 10.00
T 18.50 7.00 6.00 6.50 5.75 4.44 47.56 — 4.12 14.81 15.50 5.69 4.50 26.00 4.50 10.00
U 20.62 7.75 6.69 7.25 6.50 4.81 41.16 — 5.38 16.53 19.38 6.00 5.00 15.00 5.00 11.50
U 20.62 7.75 6.69 7.25 6.50 4.81 49.16 — 5.38 16.53 19.38 6.00 5.00 23.00 5.00 11.50
W 23.00 6.81 8.59 9.88 5.88 5.50 42.12 — 4.50 17.38 18.41 7.00 7.00 15.00 7.00 12.00
W 23.00 6.81 8.59 9.88 5.88 5.50 48.12 — 4.50 17.38 18.41 7.00 7.00 21.00 7.00 12.00
X 24.38 6.75 9.12 10.94 6.00 6.00 45.75 — 4.50 18.00 18.38 7.00 7.25 18.00 7.25 13.00
Y 26.69 7.50 9.75 11.81 6.60 7.00 50.50 — 5.00 19.25 20.50 8.00 8.00 20.00 8.00 13.00
Z 30.12 9.50 10.62 12.94 8.00 7.25 54.69 — 6.25 22.69 23.50 8.25 9.50 20.00 9.50 15.00

† Dimensions shown are for S-4320 Latch kits. Dimensions for sizes 20 ton carbon and larger are for PL Latch Kits.
†† Dimension before machining (as forged).
* NOTE: Proof load is 2 times Working Load Limit. All carbon hooks—average straightening load (ultimate load) is 5 times
Working Load Limit. Alloy eye hooks 1 ton through 22 ton—average straightening load (ultimate load) is 5 times Working
Load Limit. Alloy eye hooks 30 tons through 60 tons—average straightening load (ultimate load) is 4.5 times Working Load
Limit. Alloy Shank Hooks 1 ton thru 22 ton—average straightening load (ultimate load) is 5 times the Working Load Limit.
Alloy Shank hooks 30 ton through 300 ton ultimate load is 4.5 times the Working Load Limit. All Bronze hooks—average
straightening load (ultimate load) is 4 times Working Load Limit.

SEE APPLICATION AND WARNING INFORMATION

Shank Hooks
Patented trademark indicates QUIC-CHECK™ product

Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK™ features:

Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK™ measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e., tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further
for possible damage.
quic-check QT logo

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elebia evo2 and evo2l Crane Hooks

Elebia evo2 and evo2l Crane Hooks

The evo2 is a crane hook designed for masterlinks, which, like the rest of our automatic crane hooks, engages and releases the load remotely, increasing safety, productivity and comfort for all lifting operations. The evo 2L shares the same features mentioned above,...

Elebia evo5 Crane Hooks

Elebia evo5 Crane Hooks

The evo range was designed to enhance safety and increase productivity. It is designed under a fail-safe principle. Most importantly, this hook CAN NOT drop a suspended load. This is a feature of all our designs, geometrically fail-safe, without any sensors or...

OZ Lifting Beam Clamp

OZ Lifting Beam Clamp

Robust all-steel construction Super-quick adjustment to most I-, S-, and W-beams Durable baked enamel paint protection Stainless steel ID tag Individual serial number and test certificate

OZ Lifting USA Push Beam Trolleys

OZ Lifting USA Push Beam Trolleys

Fastest adjusting trolley requiring no tools to install Anti-drop plate ensures safe load handling Lightweight robust construction Durable baked enamel provides protection Fits to most I-, S-, and W-beams RoHS-compliant zinc-plated finish Glow-in-the-dark decals...