Leading the lifting & rigging industry
Certex Logo
7 x 19 Galvanized Cable

7 x 19 Galvanized Cable

by | Nov 8, 2023

Technical Resources Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
7 x 7 Stainless Steel Wire Rope, Type 304

7 x 7 Galvanized Cable

by | Nov 8, 2023

Technical Resources: Design & Construction Operation & Maintenance Matching the Wire Rope with Sheaves and Drums Calculating Drum Capacity Inspection of Wire Rope Lubrication & Preservation Wire Rope...
6×7 Class General Purpose Wire Rope

6×7 Class General Purpose Wire Rope

by | Nov 7, 2023

6×7 Rope Characteristics: Excellent abrasion resistance; less bending fatigue resistance Typical Applications: Dragging and haulage in mines, inclined planes and tramways, sand lines. IWRC shown; fiber core available. Technical Resources: Design &...
316 Stainless Steel Wire Rope Clips

316 Stainless Steel Wire Rope Clips

by | Nov 7, 2023

• Available in sizes 1/8˝ through 5/8˝. • Entire clip is made from 316 Stainless Steel to resist corrosive and rusting action. • All components are Electro-Polished. • All Clips are individually bagged or tagged with proper application instructions and...
Crosby® Fist Grip® Clips

Crosby® Fist Grip® Clips

by | Nov 7, 2023

G-429 Fist Grip® Clips – Warnings & Application Instructions Bolts are an integral part of the saddle. Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation. All sizes have forged steel saddles....
Crosby® S-502 Closed Swage Socket

Crosby® S-502 Closed Swage Socket

by | Nov 6, 2023

Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper after Swage dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing...
Crosby® S-501 Open Swage Socket

Crosby® S-501 Open Swage Socket

by | Nov 6, 2023

Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper after Swage dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing...
Wirelock® W416-7 Socket Compound

Wirelock® W416-7 Socket Compound

by | Nov 6, 2023

WireLock® – Warnings & Application Instructions Approvals • Lloyds Register of Shipping • Det Norske Veritas (DNV) • United States Coast Guard • Registro Italiano Navale • Gemanischer Lloyd NATO Numbers 100cc 8030-21-902-1823 250cc 8030-21-902-1824 500cc...
Crosby® Grooved Closed Spelter Sockets

Crosby® Grooved Closed Spelter Sockets

by | Nov 6, 2023

G-417 Spelter Sockets – General Guidelines Forged Steel Sockets thru 1-1/2,˝ cast alloy steel 1-5/8˝ thru 4.˝ Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with...
Crosby® Grooved Open Spelter Sockets

Crosby® Grooved Open Spelter Sockets

by | Nov 6, 2023

G-416 Spelter Sockets – General Guidelines Forged Steel Sockets thru 1-1/2,˝ cast alloy steel 1-5/8˝ thru 4.˝ Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x...
Crosby® Radiolink plus Load Monitor

Crosby® Radiolink plus Load Monitor

by | Nov 6, 2023

  Radiolink plus is designed to be rigged with Crosby standard shackles – DNV-GL type approved wireless tension load cell capable of weighing and dynamic load monitoring in capacities from 1t to 500t – from stock with an ATEX and IECEx version available for...
Crosby® BlueLink Load Monitor

Crosby® BlueLink Load Monitor

by | Nov 6, 2023

Home / / Page 12 Crosby® BlueLink Load Monitor Category: Uncategorized Description Designed to replace outdated mechanical products still in the field, this 14,300lb (6500kg) Dynamometer, the 'BlueLink', is the latest SP product to feature their proprietary Bluetooth...
Crosby® The Terminator™ Wedge Socket

Crosby® The Terminator™ Wedge Socket

by | Nov 6, 2023

Wedge Sockets – Warnings & Application Instructions Basket is cast steel Individually magnetic particle inspected Pin diameter and jaw opening allows wedge and socket to be used in conjunction with open swage and spelter sockets. Secures the tail or...
X100® Grade 100 Swivel Self Locking Hook with Bearing

X100® Grade 100 Swivel Self Locking Hook with Bearing

by | Oct 2, 2023

  RATED FOR OVERHEAD LIFTING Rated for Overhead Lifting Notched Integrated Latch to Help Avoid Hook Damage 100% Forged Alloy Steel Quenched and Tempered Powder Coated Blaze Orange 100% Proof Tested at 2 times the Working Load Limit 100% Mag-Particle Crack...
Advantage Stainless Steel Wire Rope Clips

Advantage Stainless Steel Wire Rope Clips

by | Oct 2, 2023

Methods Of Application 1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first clip one base width from the...
X100® Drop Forged – Hot Galvanized Wire Rope Clips

X100® Drop Forged – Hot Galvanized Wire Rope Clips

by | Oct 2, 2023

APPROVED FOR OVERHEAD LIFTING Methods Of Application 1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first...
Malleable Wire Rope Clips

Malleable Wire Rope Clips

by | Oct 2, 2023

Methods Of Application 1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first clip one base width from the...
8” J-Hook/RT-Hook

8” J-Hook/RT-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
RJT Cluster Hook

RJT Cluster Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
8” J-Hook/Mini J-Hook

8” J-Hook/Mini J-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
8” J-Hook

8” J-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
15” J-Hook/RT-Hook

15” J-Hook/RT-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
15” J-Hook

15” J-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
Mini J-Hook

Mini J-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
15” J-Hook/T-Hook

15” J-Hook/T-Hook

by | Sep 29, 2023

• 5/16” Grade 70 V Chain Bridles • Entire Assemblies are Yellow Zinc • End Fittings on Each Leg are Connected with a Welded Link • Working Load Limit 5,400 lbs. at 60 Degrees
NEWCO Slip Thru Thimbles

NEWCO Slip Thru Thimbles

by | Sep 28, 2023

NEWCO SLIP-THRU THIMBLES are designed to allow passage of an identical thimble through its eye. This is a necessity when a regular sling is used as a choker sling. SLIP-THRU THIMBLES also prevent the eye of the sling from mashing together and the top of the eye...
X100® Weld-on Lifting Points

X100® Weld-on Lifting Points

by | Sep 26, 2023

APPROVED FOR OVERHEAD LIFTING Use weld-on pivoting link only with ferrous metal (steel) Loads may disengage from link if proper welding, assembly, and lifting procedures are not used Spring loaded pivoting link for easy rigging Always inspect weld-on lifting point for...