Never Saddle a Dead Horse
When using wire rope clips, (also know as
wire rope clamps) always apply the saddle
of clip to the "live side" or load bearing
side of the cable assembly.
Methods Of Application
1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope.
2. Apply the next clip as near the loop as possible. Turn on the nuts but do not tighten.
3. Space additional clips equally between the first two. Take up rope slack. Tighten all nuts evenly on all clips.
| SIZE | STOCK NUMBER | WEIGHT/100 PCS. | MIN CLIPS REQUIRED |
TURN BACK LENGTH |
|---|---|---|---|---|
| 1/16″ | SWRC062 | 2 lbs. | 2 | 2 1/2″ |
| 1/8″ | SWRC125 | 5 lbs. | 2 | 3 1/4″ |
| 3/16″ | SWRC187 | 11 lbs. | 3 | 3 3/4″ |
| 1/4″ | SWRC250 | 19 lbs. | 3 | 4 3/4″ |
| 5/16″ | SWRC312 | 30 lbs. | 3 | 5 1/4″ |
| 3/8″ | SWRC375 | 46 lbs. | 3 | 6 1/2″ |
| 1/2″ | SWRC500 | 68 lbs. | 3 | 11 1/2″ |
| 5/8″ | SWRC625 | 92 lbs. | 3 | 12″ |
| 3/4″ | SWRC750 | 104 lbs. | 4 | 18″ |
| 7/8″ | SWRC875 | 168 lbs. | 4 | 19″ |
| 1″ | SWRC100 | 186 lbs. | 5 | 26″ |
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve di erent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...
The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve di erent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...
