Certex Logo

Categories

Petzl PROGRESS ADJUST-I Single Adjustable Progression Lanyard

Petzl PROGRESS ADJUST-I Single Adjustable Progression Lanyard

Single Adjustable Progression Lanyard

PROGRESS ADJUST-I is a single adjustable progression lanyard that, when combined with another lanyard, allows continuous connection for different types of progression (such as rope ascent or moving along a fixed line). Using the ADJUST rope adjuster, the length can be quickly and easily adjusted. Reversible, the ADJUST rope adjuster can be placed on the anchor or on the harness ventral attachment point. The CAPTIV ADJUST and STUART accessories help hold the connectors in a good position for easy clipping.

Description

  • Adjustable single lanyard provides continuous connection during all types of progression when used with a second lanyard:
    – Rope ascent: lanyard for attaching an ASCENSION handled rope clamp, PROGRESS ADJUST-I progression lanyard allows adjustment of lanyard length when passing intermediate anchors
    – Moving along a lifeline: lanyards of the same length to facilitate progression
  • Easy handling:
    – The ADJUST rope adjuster is reversible and can be placed on the anchor or on the harness ventral attachment point
    – Very quick and precise length adjustment, due to the ergonomic shape of the ADJUST rope adjuster
    – CAPTIV ADJUST positioning bar helps hold the ADJUST rope adjuster in the proper position and keeps the lanyard and rope adjuster integrated with the carabiner (1)
    – Can be used with VERTIGO connector and the TANGA accessory when the rope adjuster is at the anchor
    – STUART accessory helps hold the connector in the proper position when the rope adjuster is attached to the harness ventral attachment point
    – Compatible with the gated ventral attachment point on ASTRO harnesses
  • Dynamic rope lanyard to limit the impact force transmitted to the user in the event of a short fall
  • Individual identification marking on plastic sheath to track equipment throughout its lifespan(1) Compatible with OK, Am’D, Bm’D, and OXAN connectors.

Specifications

  • Weight: 185 g
  • Material(s): Aluminum, nylon, polyester, high-modulus polyethylene (HMPE), elastomer
  • Length: up to 100 cm
  • Certification(s): CE EN 358, UKCA, EAC, ANSI Z359.3, CSA Z259.11, GB 24453 / WQX

References

References L044BA00
Guarantee 3 years
Inner Pack Count 1

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...