Leading the lifting & rigging industry
Certex Logo

Categories

Petzl DURALINE 10.5 mm CUSTOM Low Stretch Kernmantle Rope

Petzl DURALINE 10.5 mm CUSTOM Low Stretch Kernmantle Rope

High-Strength, Low Stretch Kernmantle Rope that is Customizable and Made for Work at Height, Rope Access, and Rescue

The DURALINE 10.5 mm CUSTOM low stretch kernmantle rope is designed for work at height, rope access, and rescue. Its aramid fiber sheath provides better resistance to abrasion, wear, and heat, than a classic rope. The thin diameter makes it flexible and lightweight. It’s equipped with a rigid identification label on the end of the rope for better tracking and durability. The length and packaging are customizable to meet the needs of the user.


EMAIL PAGE

EMAIL PAGE

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

Description

  • Low stretch kernmantle rope offering better resistance and durability for work at height, rope access, and rescue:
    – Sheath is made entirely from aramid fiber, providing excellent resistance to abrasion, wear, sharp edges, and heat
    – Twice as resistant to abrasion than the AXIS 11 mm rope
    – Two to three times more resistant to sharp edges than the AXIS 11 mm rope
    – The rope can tolerate short exposure to a heat source, such as a hot pipe (1)
    – Can tolerate accidental exposure to a flame (2)
  • Easy to handle:
    – Better control when lowering heavy loads
    – Ideal for lowering repeatedly or at a consistent speed
  • Markings at the end of the rope on a laser-marked rigid identification label, for better tracking and longer-lasting markings
  • Customizable length and packaging:
    – Rope of a specified length can be ordered in one-meter increments, from 2 to 500 meters
    – Individual packaging, in cardboard or a black BUCKET bag(1) Maximum 5 minutes at 200° C.
    (2) Maximum of 3 seconds at 650° C.
    Note: Details about tests carried out and results are available at Petzl.com

Specifications

  • Diameter: 10,5 mm
  • Material(s): Aramid, nylon
  • Certification(s): CE EN 1891 type A, UKCA, NFPA 2500 Technical Use, XF 494
  • Weight per meter: 75 g
  • Strength tied with figure-eight knot: 18 kN
  • Impact force (factor 0,3): inférieure à 6 kN
  • Number of factor 1 falls: supérieur à 5
  • Construction: 32 carrier
  • Percentage of sheath: 40 %
  • Static elongation: 2,3 %

References

References R075XY
Customizable product, available on request
Guarantee 3 years
Inner Pack Count 1

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...