Certex Logo

Categories

Endurance Dyform® 8/8PI

Lay Type Lay Direction Finish Grade n/mm2
Ordinary Langs Right Hand Left Hand Bright Galv Dyform

.

.

.

.

 

Diameter Approx Mass WSC
Minimum Breaking Force
Rope Grade
Dyform
in mm lb.ft kg/ft tons kN
3/8 0.32 0.14 9.7 86.3
10 0.30 0.14 9.8 87.3
11 0.38 0.17 11.8 105.0
7/16 0.40 0.18 12.4 110.4
12 0.44 0.20 14.2 126.0
1/2 0.51 0.23 16.2 143.7
13 0.52 0.23 16.5 147.0
14 0.60 0.27 19.2 171.0
9/16 0.65 0.29 20.3 180.7
5/8 0.80 0.35 25.0 222.5
16 0.78 0.35 25.2 224.0
18 1.01 0.46 31.8 283.0
19 1.12 0.51 35.5 316.0
3/4 1.16 0.51 36.0 320.4
20 1.24 0.56 39.3 350.0
22 1.49 0.68 47.7 424.0
7/8 1.58 0.70 48.3 429.4
24 1.78 0.81 56.8 505.0
1 2.05 0.91 62.8 558.5
26 2.12 0.96 66.5 592.0
28 2.47 1.12 77.2 687.0
1 1/8 2.60 1.15 79.0 703.1
1 1/4 3.22 1.42 98.0 872.2
32 3.26 1.48 100.8 897.0
1 3/8 3.90 1.72 117.0 1041.3
36 4.07 1.85 127.9 1138.0
1 1/2 4.62 2.04 138.0 1228.2

• High breaking force confirmed by Bridon’s “Powercheck” testing of a sample from each production length.
• Superior bending fatigue life when compared with other conventional eight strand ropes – confirmed by laboratory testing and extensive field experience.
• Excellent resistance to crushing and abrasion resulting from the overall compactness and robustness of the rope and the Dyform strands – recommended when multi-layer spooling is involved.
• Reduced elongation results from increased steel content and the Dyform process.
• Optional plastic coating of IWRC to further extend fatigue life, improve structural stability and resistance to corrosion.

NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information.

WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Palmer Safety Guardrail System

Palmer Safety Guardrail System

Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...