Certex Logo

Categories

3M™ DBI-SALA® Concrete and I-Beam Portable Horizontal Lifeline System

3M™ DBI-SALA® Concrete and I-Beam Portable Horizontal Lifeline System

• Complete system includes stanchions, cable assembly and Zorbit™ energy absorber
• Easily installed with a standard torque wrench
• Provides 100% tie-off for two workers per span, six per system, traverse entire system without disconnecting
• Single span systems up to 60’ (18m), multi-span systems for unlimited distances.

Please note: See product instruction manuals for complete clearance information or different user scenarios.

Concrete HLL System
7003520 20’ (6m) system
7003530 30’ (9m) complete system
7003540 40’ (12m) complete system
7003550 50’ (15m) complete system
7003560 60’ (18m) complete system
Portable HLL Clearance Chart
Span Length 1-2 Users 6′ (1.8m) Lanyard 1-2 Users SRL
0-10′ (3m) 14’-2” (4.3m) 10’-9” (3.2m)
10′-20′ (3-6m) 15’-5” (4.6m) 11’-11” (3.6m)
20′-30′ (6-9m) 16’ (4.8m) 13’-2” (3.9m)
30′-40′ (9-12m) 17’-10” (5.4m) 14’-6” (4.4m)
40′-50′ (12-15m) 19’ (5.7m) 15’-7” (4.7m)
50′-60′ (15-18m) 20’-2” (6.1m) 16’-8” (5m)

(required above lower level or obstruction)

Customize Your HLL System
7006334 Additional stanchion
7006333 Additional tie-back assembly (must use with stanchion on each end of system)
7006335 I-Beam Adapter Base for stanchion – fits 10” to 25” (25 to 63cm) flange width, 1⁄2” to 3” (1.25 to 7.6m) thick
7006340 I-Beam Tie-Back Assembly
7403020 20’ (6m) cable assembly with turnbuckle and Zorbit™

(last 3 digits in Part # detail length)

A simple and versatile horizontal system specifically designed for multiple applications! The system gives you an easy-to-install tie-off point before decking or other fall protection is available. The Portable Horizontal System connects to rebar or prestressed concrete beams, shear connector studs or directly to steel I-beams with an optional adapter. The stanchions are adjustable from vertical 20˚ left or right for easy passage or completely horizontal for transportation to the jobsite.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell 2t Adjustable Height & Span Gantry Model K90-2

Caldwell 2t Adjustable Height & Span Gantry Model K90-2

Features: Adjustable span standard on 10'-16' spans through 5 tons Bolted connections on spans of 20'-24' and all 8 ton units Heavy duty supported leg design Balanced design allows for easy rolling, even under load Conforms to AISC, OSHA, and CMAA specifications...

Caldwell Adjust-A-Leg Two Point Lift – Model AL2

Caldwell Adjust-A-Leg Two Point Lift – Model AL2

Caldwell’s patented design to safely lift unbalanced loads has evolved a bit since 1954, but not much. When it’s right, it’s right. Features: Allows crane hook to be over the load's center of gravity in unbalanced or non-symmetrical 2-point lifts Quickly adjusts to...

Caldwell Adjust-A-Leg Four Point Lift – Model AL4

Caldwell Adjust-A-Leg Four Point Lift – Model AL4

Get greater adjustment and flexibility with the 4-point lift. Unbalanced or non-symmetrical loads can now be handled safely and efficiently. Features: Allows crane hook to be over the load's center of gravity in unbalanced or non-symmetrical 4-point lifts Quickly...

Caldwell Adjustable Spreader Beam Model 32

Caldwell Adjustable Spreader Beam Model 32

Caldwell’s patented design to safely lift unbalanced loads has evolved a bit since 1954, but not much. When it’s right, it’s right. Features: Ideal where headroom is not limited Adds stability to lift Telescopic spread standard Spread adjusts in 1" increments...