Leading the lifting & rigging industry
Certex Logo

Categories

Crosby® Bolt Type Anchor Shackles – G-2130 / S-2130

Crosby® Bolt Type Anchor Shackles - G-2130 / S-2130

G-2130 / S-2130

  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Forged, Quenched & Tempered, with alloy bolts.
  • Hot-dip galvanized (G) or self colored (S). 85, 120, and 150-metric ton shackles are all hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.
  • Sizes 3/8 and below are mechanically galvanized.
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit (1/3t -55t).
  • Approved for use at -40° F (-40° C) to 400° F (204° C).
  • Meets or exceeds all requirements of ASME B30.26.

EMAIL PAGE

EMAIL PAGE

VIEW IN CATALOG

VIEW IN CATALOG

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
Nominal Size (in) Working Load Limit (t) Stock No. Weight Each (lb) Dimensions (in) Tolerance (+ / – in)
G-2130 S-2130 G-2130OC A B C D E F H L M N C A
3/16 0.33 ‡ 1019464 – – .06 .38 .25 .88 .19 .60 .56 1.47 .98 1.29 .19 .06 .06
1/4 0.5 1019466 – – .11 .47 .31 1.13 .25 .78 .61 1.84 1.28 1.56 .25 .06 .06
5/16 0.75 1019468 – – .22 .53 .38 1.22 .31 .84 .75 2.09 1.47 1.82 .31 .06 .06
3/8 1 1019470 – – .33 .66 .44 1.44 .38 1.03 .91 2.49 1.78 2.17 .38 .13 .06
7/16 1.5 1019471 – – .49 .75 .50 1.69 .44 1.16 1.06 2.91 2.03 2.51 .44 .13 .06
1/2 2 1019472 1019481 – .79 .81 .64 1.88 .50 1.31 1.19 3.28 2.31 2.80 .50 .13 .06
5/8 3.25 1019490 1019506 1262013 1.68 1.06 .77 2.38 .63 1.69 1.50 4.19 2.94 3.56 .69 .13 .06
3/4 4.75 1019515 1019524 1262022 2.72 1.25 .89 2.81 .75 2.00 1.81 4.97 3.50 4.15 .81 .25 .06
7/8 6.5 1019533 1019542 1262031 3.95 1.44 1.02 3.31 .88 2.28 2.09 5.83 4.03 4.82 .97 .25 .06
1 8.5 1019551 1019560 1262040 5.66 1.69 1.15 3.75 1.00 2.69 2.38 6.56 4.69 5.39 1.06 .25 .06
1-1/8 9.5 1019579 1019588 1262059 8.27 1.81 1.25 4.25 1.13 2.91 2.69 7.47 5.16 5.90 1.25 .25 .06
1-1/4 12 1019597 1019604 1262068 11.71 2.03 1.40 4.69 1.29 3.25 3.00 8.25 5.75 6.69 1.38 .25 .06
1-3/8 13.5 1019613 1019622 1262077 15.83 2.25 1.53 5.25 1.42 3.63 3.31 9.16 6.38 7.21 1.50 .25 .13
1-1/2 17 1019631 1019640 1262086 19.00 2.38 1.66 5.75 1.53 3.88 3.63 10.00 6.88 7.73 1.62 .25 .13
1-3/4 25 1019659 1019668 1262095 33.91 2.88 2.04 7.00 1.84 5.00 4.19 12.34 8.80 9.68 2.25 .25 .13
2 35 1019677 1019686 – 52.25 3.25 2.30 7.75 2.08 5.75 4.81 13.68 10.15 10.81 2.40 .25 .13
2-1/2 55 1019695 1019702 – 98.25 4.13 2.80 10.50 2.71 7.25 5.69 17.90 12.75 13.58 3.13 .25 .25
3 † 85 1019711 – – 154 5.00 3.30 13.00 3.12 7.88 6.50 21.50 14.62 15.13 3.62 .25 .25
3-1/2 † 120 ‡ 1019739 – – 265 5.25 3.76 14.63 3.62 9.00 8.00 24.88 17.02 17.00 4.38 .25 .25
4 † 150 ‡ 1019757 – – 338 5.50 4.26 14.50 4.00 10.00 9.00 25.68 18.00 17.75 4.56 .25 .25

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications..
† Individually Proof Tested with certification. ‡ Furnished with eye bolts for handling.

G-2130 / S-2130

  • Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
  • 3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV 2.7-1 and EN13889.
  • Crosby 3.25t through 25t G-2130OC anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 31 ft-lb (42 Joules) min. avg. at -4° F (-20° C). The tests are conducted by Crosby and 3.1 test certification is available upon request.
  • All other 2130 shackles can meet charpy requirements of 31 ft-lb (42 Joules) avg at -4° F (-20° C) when requested at time of order
  • Meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor
  • Look for the Red Pin®… the mark of genuine Crosby quality.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Sunshine Cordage 8 Strand Nylon Mooring Rope

Sunshine Cordage 8 Strand Nylon Mooring Rope

8 Strand plaited nylon rope is a non-rotational rope that eliminates hocking and other problems associated with twisted anchor lines. Nylon is known for its elasticity and tremendous shock absorbing qualities. Other properties include good abrasion and UV resistance....

Sunshine Cordage 8 Strand Maxiflex Dual Fiber Mooring Line

Sunshine Cordage 8 Strand Maxiflex Dual Fiber Mooring Line

8 stand high strength polyester (40%) /polypropylene (60%) blended mooring lines, used for mooring larger vessels. Manufactured in accordance with OCIMF guidelines and approved for use with oil tankers. These ropes have a higher strength to weight ratio than regular...

Sunshine Cordage 8 Strand Superdan Polypropylene Mooring Line

Sunshine Cordage 8 Strand Superdan Polypropylene Mooring Line

8 strand extra high strength polypropylene mooring lines, used for mooring larger vessels. These ropes have a high strength to weight ratio, float and do not absorb water. Additionally they have high resistance to abrasion and chemicals. All our mooring lines are...

Sunshine Cordage 8 Strand Danline Polypropylene Mooring Line

Sunshine Cordage 8 Strand Danline Polypropylene Mooring Line

8 strand extra high strength polypropylene mooring lines, used for mooring larger vessels. These ropes have a high strength to weight ratio, float and do not absorb water. Additionally they have high resistance to abrasion and chemicals. All our mooring lines are...