Leading the lifting & rigging industry
Certex Logo

Categories

Elephant Jumbo Beam Clamp

Elephant Jumbo Beam Clamp
  • The Jumbo Beam Clamp is a great option for rigging applications.
  • This clamp line features a wide jaw opening for wide flange beams used throughout industry.
  • The JBC’s clamp screw assembly is also zinc plated.
  • This clamp series features metric capacities that range from 3, 5, 6, 10 and 16 tons.

EMAIL PAGE

EMAIL PAGE

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
STOCK NUMBER S.W.L (LBS.) S.W.L. US TON BEAM WIDTH (IN.) MAX. PLATE THICKNESS (IN.) JAW TYPE WEIGHT (LBS)
JBC-3A 6600 3.3 3.00-7.48 0.55 Fixed 18
JBC-5A 11000 5.5 6.00-12.00 1.29 Fixed 33
JBC-5B 11000 5.5 3.00-7.48 1.29 Fixed 22
JBC-6 13200 6.6 8.00-18.00 1.29 Fixed 42
JBC-10 22000 11 8.00-18.00 1.29 Fixed 62
JBC-16A 35000 17.6 16.00-24.00 2.20 Fixed 135
JBC-16B 35000 17.6 8.00-18.00 2.20 Fixed 119
JBC-32 48000 24 12.00-30.00 2.20 Fixed 651

 

Stock Number DIMENSIONS (IN.)
A B C D E max G H J K min
JBC-3A 5.12 0.55 1.06 4.21 10.71 10.87 0.79 3.35 10.00
JBC-5A 5.50 0.55 1.81 4.80 17.72 16.10 0.98 3.90 12.56
JBC-5B 5.50 0.55 1.81 4.80 13.39 13.35 0.98 3.90 12.99
JBC-6 6.60 0.55 2.17 4.57 23.62 22.01 0.98 3.90 16.46
JBC-10 5.51 0.79 2.17 4.69 23.62 22.01 1.26 3.90 16.46
JBC-16A 6.89 0.79 3.00 5.12 24.02 31.89 1.77 7.87 25.75
JBC-16B 6.89 0.79 3.00 5.12 17.99 25.98 1.77 7.87 22.60
JBC-32 17.87 0.78 3.20 4.12 39.40 42.83 2.61 10.63 31.81

Chart only applies to overhead beam attachment. If clamps are being used to lift beams, this information is not applicable. Table applies to the listed models only. Stress calculations should be performed by the end user’s engineering dep. Reduction in working load limit when side loads are applied
Angle from vertical (degree) 0 0 to 15 15 to 30 30 to 45
Reduction Factor NIL 17.00% 34.00% 50.00%
Model WLL WLL WLL WLL
JBC-3A 3 ton 2.5 ton 2 ton 1.5 ton
JBC-5A 5 ton 4.1 ton 3.3 ton 2.5 ton
JBC-6 6 ton 5 ton 4 ton 3 ton
JBC-10 10 ton 8.3 ton 6.6 ton 5 ton
JBC-16B

JBC-16A

 16 ton 13.2 ton 10.5 ton 8 ton
JBC-32 32 ton 26.56 ton 21.12 ton 16 ton

* Warning: Clamps must be installed properly and fully tightened

* Always contact the manufacturer when in doubt

 

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...