| Type | WLL (Persons) | Weight (kg/unit) | Dimensions (mm) | M | N (MM) | ||||||||
| T | B | C | D | E | G | I | K | L | |||||
| PSA-VRS-STARPOINT M12 | 1 | 0.2 | 42 | 13 | 10 | 30 | 30 | 34 | 19.8 | 56 | 18 | M12 | 8 |
| PSA-VRS-STARPOINT M16 | 1-2 | 0.33 | 49 | 15 | 15 | 35 | 35 | 40 | 23.5 | 65 | 24 | M16 | 10 |
| PSA-VRS-STARPOINT M20 | 1-2 | 0.56 | 58 | 18 | 17 | 40 | 42 | 54 | 29.3 | 75 | 30 | M20 | 12 |
| PSA-VRS-STARPOINT M12 Special Length | 1 | * | 42 | 13 | 10 | 30 | 30 | 34 | 19.8 | 56 | 19-150 | M12 | 8 |
| PSA-VRS-STARPOINT M16 Special Length | 1-2 | * | 49 | 15 | 15 | 35 | 35 | 40 | 13.5 | 65 | 25-120 | M16 | 10 |
*Depends on design
PSA-Fall arrest anchor points are no lifting points in a conventional sense. They are used as anchor points for personal fall arrest systems (PSA) acc. to EN 363:2008. After installation, harnesses can be attached into them. These anchor points can also be permanently installed, f.e. at a building to allow to attach fall arrest safety harnesses.
These products are tested by a notified institution of DGUV (Deutsche Gesetzliche Unfallversicherung) with the evidence of the in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5 for lifting points required forces. They are corresponding to a “anchor point” according to European edict 2016/425 and the DIN 795:2012-10 resp. DIN CEN / TS 16415:2013-4 and they are marked with the number of load bearing persons (=1 or 2 persons).
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Electrolines’s closed-body swageless clevis turnbuckle can be quickly installed and tensioned in the field without special tools or processes. For ropes from 1/16 to 3/4 inches in diameter. Fitting strength exceeds the rated breaking strength of most ropes. Available...
Electroline’s industrial series clevis (fork/jaw) socket fitting includes a pin and cotter pin. It features a swageless rope termination that can be quickly installed in the field without special tools or processes. Available for ropes from 7/16 to 1 inches in size....
Electroline’s machined clevis fitting (fork/jaw) includes a pin and cotter pin and features a swageless rope termination that allows it to be quickly installed in the field without special tools or processes. Available for ropes from 1/16 to 1-1/2 inches in size....
Electroline’s forged wire rope clevis (fork/jaw) fitting includes a threaded pin and nut. It features a swageless rope termination that can be quickly installed in the field without special tools or processes. Available for ropes from 1/4 to 1-1/4 inches in size....
