Leading the lifting & rigging industry
Certex Logo

Categories

Yalex Cordage

Yalex Cordage

Yalex is a single braid, 12-strand rope constructed of specially lubricated 1W81 high tenacity polyester. Yalex’s two end per carrier structure creates a larger void in the middle of rope which makes it easier to splice, and makes used rope splicing much easier to perform.
Yalex is always coated with Yale’s Maxijacket urethane coating, which reduces the new ropes tendency to snag, greatly enhances abrasion resistance and is a great way to color code ropes for application or load rating.


EMAIL PAGE

EMAIL PAGE

VIEW IN CATALOG

VIEW IN CATALOG

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
Diamerter Inches (mm) Average Spliced
Break Strength*		 Minimum Spliced
Break Strength*		 Maximum**
Work Load 5:1		 Weight
Lbs Kg Lbs Kg Lbs Kg Lbs/ 100ft Kg/100m
1/4 (6.0) 2,000 1,135 2,250 1,020 500 225 2.2 3.3
5/16 (8.0) 4,000 1,815 3,600 1,630 800 360 2.8 4.2
3/8 (9.0) 6,000 2,720 5,400 2,459 1,200 540 4.0 6.0
7/16 (11.0) 9,000 4,085 8,100 3,675 1,800 815 7.1 10.6
1/2 (12.0) 12,500 5,675 11,250 5,105 2,500 1,135 9.0 13.4
9/16 (14.0) 16,500 7,490 14,850 6,740 3,300 1,495 11.2 16.7
5/8 (16.0) 18,200 8,260 16,380 7,435 3,640 1,650 12.7 18.9
3/4 (18.0) 24,000 10,895 21,600 9,805 4,800 2,175 17.0 25.3
7/8 (22.0) 35,500 16,115 31,950 14,505 7,100 2,330 25.6 38.1
1 (24.0) 43,000 19,520 38,700 17,565 8,600 3,900 32.3 48.1
1-1/8 (27.0) 56,000 25,420 50,400 22,880 11,200 5,080 34.9 52.0
1-1/4 (30.0) 65,500 29,735 58,950 26,760 13,100 5,945 39.3 58.5
1-5/6 (32.0) 74,750 33,935 67,272 30,540 14,950 6,785 46.6 69.4
1-1/2 (36.0) 93,500 42,445 84,150 38,200 18,700 8,485 60.0 89.3
1-5/8 (40.0) 112,500 51,075 101,250 45,965 22,500 10,215 83.0 123.6
1-3/4 (42.0) 120,000 54,480 108,000 49,030 24,000 10,900 94.0 140.0
2 (48.0) 133,200 60,470 119,880 54,425 26,640 12,090 117.0 174.2

 

* Knots and abrupt bends significantly reduce the strength of all ropes and lowers maximum working load.
**Working load is based on static of moderately dynamic lifting/pulling operations. Instantaneous changes in the load up or down, in excess of 10 percent of the rope’s rated working load constitutes hazardous shock load and would void normal working load recommendations. Consult Yale Cordage for guidelines for working loads and safe use of rope.

Energy Absorption
The colored area under the curve represents the
rope’s ability to do “work” and is expressed in
foot-pounds per pound of rope in tension.
■ Green working 409 ft. lbs./lb.
■ Red ultimate 10,700 ft. lbs./lb.

Dielectric Strength
The maximum allowable leakage for clean, dry Yalex is 100 Micro Amperes when tested at 90KV per ASTM 1701-05 “Routine Production Test”. Absorbed and entrained moisture or impurities will increase ropes conductivity dramatically.
Splice using Yale’s splicing technique document #10015101 (all sizes).

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elebia evo2 and evo2l Crane Hooks

Elebia evo2 and evo2l Crane Hooks

The evo2 is a crane hook designed for masterlinks, which, like the rest of our automatic crane hooks, engages and releases the load remotely, increasing safety, productivity and comfort for all lifting operations. The evo 2L shares the same features mentioned above,...

Elebia evo5 Crane Hooks

Elebia evo5 Crane Hooks

The evo range was designed to enhance safety and increase productivity. It is designed under a fail-safe principle. Most importantly, this hook CAN NOT drop a suspended load. This is a feature of all our designs, geometrically fail-safe, without any sensors or...

OZ Lifting Beam Clamp

OZ Lifting Beam Clamp

Robust all-steel construction Super-quick adjustment to most I-, S-, and W-beams Durable baked enamel paint protection Stainless steel ID tag Individual serial number and test certificate

OZ Lifting USA Push Beam Trolleys

OZ Lifting USA Push Beam Trolleys

Fastest adjusting trolley requiring no tools to install Anti-drop plate ensures safe load handling Lightweight robust construction Durable baked enamel provides protection Fits to most I-, S-, and W-beams RoHS-compliant zinc-plated finish Glow-in-the-dark decals...