ANSI
Weather resistant 4-in-1 reversible windbreaker polyester jacket // Elastic band at wrists // Removable, zip-out sleeves – converts Class 3 jacket to Class 2 vest // Reverses from hi-vis lime to gray/black // Silver reflective tape on hi-vis side // Hi-vis reflective piping on gray/black side // Bottom hem adjustment — bungee cord/toggle pull // Mic tab on hi-vis side // Sizes M-5XL
Non-rated when reversed to all black side
RJ3410
Jacket: 75D x 100D fabric
100% polyester with TPU coating
Reflective Tape: Generic silver
Waist & Wrists: Weather resistant elastic band
Front: SBS Zipper
Zipper Tape: 100% polyester fabric
Zipper Teeth: Resin
Zipper Slider: Metal Bottom
Hem: Bungee cord/toggle pull
One 2” silver reflective stripe applied horizontally across lower chest
Two 2” silver reflective stripes applied vertically from top of horizontal stripe, over shoulders, to top of horizontal stripe on back
Two 2” silver reflective stripes applied around each sleeve at elbow
Two outer lower slash pockets with zipper closure: 7.5” x 7.8”
One outer left chest hook and loop pocket: 4.7” x 7”
Two inner lower slash pockets with zipper closure: 4.7” x 7”
One inner left chest pocket with zipper closure: 4.7” x 7”
| SIZE | M | L | XL | 2X | 3X | 4X | 5X |
|---|---|---|---|---|---|---|---|
| CHEST MEASUREMENT | 24″ | 25.5″ | 27″ | 29″ | 31″ | 33″ | 34.5″ |
Jacket measurements are taken while garment is lying flat. Please note: some size variation may occur.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Features Drop-Forged and Heat Treated Body and Components Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180° Exclusive Feature is a Patented Wear Indicator System. When Any of the Cam'S Straight Line, Convex Teeth Are Flattened Between...
For Use with Grade 80/100 Chain Slings, Wire Rope and Synthetic Assemblies 5 to 1 Design Factor Meet or Exceed All Requirements of ASME B30.26 100% Proof Tested in Accordance with ASTM A952 Hallmarked with "USA", Date Code, Link No. and Material Diameter Made in the...
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel Alloy Hooks Are Painted Orange and Stamped ”Alloy”; 3.5 to 1 Design Factor Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled Grab Hooks Are Designed to...
Drop Forged Carbon Steel or Alloy and Heat Treated Carbon Steel Hooks Are Painted Blue; Alloy Hooks Are Painted Orange Design Factor: 5 to 1 All Hooks Are Drilled for Integrated Latch Kits The Latch Is Only Designed to Retain Slings and Rigging Attachments. The Latch...
