Certex Logo

Categories

Petzl GRILLON Adjustable Work Positioning Lanyard

Petzl GRILLON Adjustable Work Positioning Lanyard

Adjustable Lanyard for Work Positioning

The GRILLON adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Depending on the configuration, it can be used in single or double mode. GRILLON is available in seven lengths (2, 3, 4, 5, 10, 15 and 20 m), and also in black. It is certified to North American, European and Russian standards.

Description

  • Easy to use: the fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station
  • Can be used in two ways:
    – double mode (on the harness side attachment points) when the user works with weight on his/her feet. This type of attachment ensures better load distribution on the belt. Length is adjusted by pressing on the pivoting cam
    – single mode, on the harness ventral attachment point, when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle, while holding the free end of the lanyard
  • Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion
  • Protective sheath protects the rope from abrasive contact and enhances rope glide. This protection can be removed for single mode use, to bring the user closer to the anchor
  • Available in seven lengths: 2, 3, 4, 5, 10, 15 and 20 m. Lanyard length is immediately identified by a color-coded label at the connector end
  • Available in two colors: white/yellow and black
  • Replacement ropes available

Specifications

  • Material(s): nylon, polyester, aluminum
  • Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC, UKCA, GB 24543 / WQX

References

References L052AA00 L052AA01 L052AA02 L052AA03 L052AA04 L052AA05
Length 2 m 3 m 4 m 5 m 10 m 15 m
Color(s) white/yellow white/yellow white/yellow white/yellow white/yellow white/yellow
Weight 480 g 560 g 640 g 720 g 1075 g 1475 g
Guarantee 3 years 3 years 3 years 3 years 3 years 3 years
Inner Pack Count 1 1 1 1 1 1
References L052AA06 L052AA07 L052AA08
Length 20 m 2 m 3 m
Color(s) white/yellow black black
Weight 1875 g 480 g 560 g
Guarantee 3 years 3 years 3 years
Inner Pack Count 1 1 1

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant QBT Quick Beam Trolley

Elephant QBT Quick Beam Trolley

Capacity Range: 1t ~ 10t Heavy Duty Quick Install Push Type Trolley   Simple Installation, No Special Tools Required Fits both ‘S’ beams and ‘W’ beams Low Profile Design     Corrosion Resistant Stainless Steel Plungers Corrosion Resistant Double Sealed Bearings Meets...

Elephant Geared Type Beam Trolleys

Elephant Geared Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Push Type Beam Trolleys

Elephant Push Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Grippa Push & Geared Trolleys

Elephant Grippa Push & Geared Trolleys

Solid carbon steel design Adjustable to fit various beam widths with traditional spacers Wheels of the units fit both I-beams and H-beams Trolley wheels are coated for corrosion resistance With anti-drop plates 100% stainless steel spark resistant & corrosion...