Certex Logo

Categories

Lift Safety Dax Full Brim Hard Hat

Lift Safety Dax Full Brim Hard Hat
  • Fiber reinforced resin shell for superior impact protection
  • Brim grip, exclusive design provides a secure feel
  • Perforated synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
  • Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
  • Meets ANSI Z89.1-2014 REQUIREMENTS FOR TYPE 1 CLASS G
  • Designed to offer outstanding protection in hot and dangerous industries, the DAX Hard hat shell has been tested to radiant heat loads producing temperatures up to, but not exceeding, 350˚ F (177˚ C).
  • Moisture-wicking foam backed microfiber liner reduces sweat build-up
  • 6 point suspension system for a secure, comfortable fit
  • Triple reinforced crown for superior impact protection

Colors:

The DAX Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.

Hard Hat Weight

Our Fiber Reinforced Hardhat Weighs in at an average 415 grams without suspension system. With suspension it weighs on an average of 475-566 grams.

Hard-Hat Classifications

Want to learn more about our hard hats and their classifications?

CSA Standard:This product currently does not carry the certification established by the Canadian Standards Association (CSA).

Uniquely Designed

Each Dax hard hat fiber shell is hand laid giving it a unique, one of a kind appearance.

Lifespan

Hard hat lifespan may vary depending on the conditions of each work site. Hard hats subjected to more wear and tear or used outdoors in direct sunlight may need to be replaced more frequently. Daily inspections are the best way to determine when to replace a hard hat shell, suspension, or the entire unit. Suggested replacement is based on service life (Based on when the hard hat was placed into service, not the manufacture date).

As a general guideline we recommend replacing hard hats every five years regardless of outside appearance, but this can vary due to use and job site conditions

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Model BFC

Caldwell Model BFC

With the Model BFC Beam Flange Clamps, you get options. First, select from five capacity choices, then decide if you need a large bail. You'll also be able to hang hoists or rig from overhead and handle even bigger loads by using the clamp in pairs with a beam....

Caldwell Spreader Beam End Fittings Model BEF

Caldwell Spreader Beam End Fittings Model BEF

Sometimes, you need to create it yourself. let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want. Features: Build your own spreader beam Designed to work with a range of shackle sizes, both top and bottom Sold as eaches, not...

Caldwell Adjustable Fiberglass Battery Lifting Beams Model 36E

Caldwell Adjustable Fiberglass Battery Lifting Beams Model 36E

Used for applications that require a non-conductive beam such as lifting industrial forklift truck batteries. Features: Lightweight units - 70% lighter than other beams Models are available for handling batteries of equal length or different lengths Heavy duty 4800-lb...

Caldwell 5t Adjustable Height & Span Gantry Model K90-5

Caldwell 5t Adjustable Height & Span Gantry Model K90-5

Features: Adjustable span standard on 10'-16' spans through 5 tons Bolted connections on spans of 20'-24' and all 8 ton units Heavy duty supported leg design Balanced design allows for easy rolling, even under load Conforms to AISC, OSHA, and CMAA specifications...