Leading the lifting & rigging industry
Certex Logo

Categories

Crosby® Screw Pin Anchor Shackles – G-209 / S-209

Crosby® Screw Pin Anchor Shackles - G-209 / S-209
  • Meets performance requirements of Grade 6 shackles.
  • Forged, Quenched & Tempered, with alloy pins.
  • Working Load Limit and Grade 6 permanently shown on every shackle.
  • Hot-dip galvanized (G) or self colored (S).
  • Sizes 3/8 inch and below are mechanically galvanized
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certifications. Proof testing and certification available when requested at the time of order, charges will apply.
  • Approved for use at -40° F (-40° C) to 400° F (204° C).

EMAIL PAGE

EMAIL PAGE

VIEW IN CATALOG

VIEW IN CATALOG

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
Nominal Size (in) Working Load Limit (t) Stock No. Weight Each (lb) Dimensions (in) Tolerance (+ / – in)
G-209 S-209 A B C D E F G H L M P C A
3/16 0.33 1018357 – .06 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.14 .19 .06 .06
1/4 0.5 1018375 1018384 .10 .47 .31 1.13 .25 .78 .62 1.28 1.84 .19 1.43 .25 .06 .06
5/16 0.75 1018393 1018400 .18 .53 .38 1.21 .31 .84 .75 1.46 2.09 .22 1.71 .31 .06 .06
3/8 1 1018419 1018428 .31 .66 .44 1.45 .38 1.03 .92 1.79 2.50 .25 2.06 .38 .13 .06
7/16 1.5 1018437 1018446 .38 .75 .50 1.69 .44 1.16 1.06 2.04 2.91 .31 2.37 .44 .13 .06
1/2 2 1018455 1018464 .72 .81 .62 1.88 .50 1.31 1.18 2.31 3.28 .38 2.69 .50 .13 .06
5/8 3.25 1018473 1018482 1.37 1.06 .75 2.38 .62 1.69 1.50 2.93 4.19 .44 3.34 .69 .13 .06
3/4 4.75 1018491 1018507 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06
7/8 6.5 1018516 1018525 3.62 1.44 1.00 3.31 .88 2.28 2.10 4.04 5.83 .50 4.50 .97 .25 .06
1 8.5 1018534 1018543 5.03 1.69 1.12 3.76 1.00 2.69 2.38 4.69 6.56 .56 5.13 1.06 .25 .06
1-1/8 9.5 1018552 1018561 7.41 1.81 1.25 4.27 1.16 2.91 2.68 5.15 7.47 .63 5.97 1.25 .25 .06
1-1/4 12 1018570 1018589 9.50 2.03 1.38 4.69 1.29 3.26 3.00 5.76 8.26 .69 6.50 1.38 .25 .06
1-3/8 13.5 1018598 1018605 13.53 2.25 1.53 5.22 1.42 3.62 3.31 6.38 9.16 .75 6.93 1.50 .25 .13
1-1/2 17 1018614 1018623 17.20 2.38 1.63 5.76 1.53 3.88 3.62 6.94 10.00 .81 7.43 1.62 .25 .13
1-3/4 25 1018632 1018641 27.78 2.88 2.00 7.00 1.84 5.00 4.19 8.80 12.34 1.00 9.19 2.25 .25 .13
2 35 1018650 1018669 45.00 3.25 2.25 7.75 2.08 5.75 4.81 10.15 13.68 1.13 10.36 2.40 .25 .13
2-1/2 55 1018678 1018687 85.75 4.12 2.75 10.51 2.72 7.25 5.81 12.75 17.92 1.38 13.17 3.13 .25 .25

6:1 Design Factor. Maximum Proof Load is 2 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see Warnings & Applications.

  • All 209 and 210 shackles can meet charpy requirements of 31 ft-lb (42 Joules) avg. at -4° F (-20° C) upon special request.
  • Meets or exceeds all requirements of ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges
  • G-210 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C271G, Type IVB, Grade A, Class 2, except for those provisions required of the contractor.
  • Look for the Red Pin®… the mark of genuine Crosby quality.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

X100® PlateMate™ Swivel Lifting Rings

X100® PlateMate™ Swivel Lifting Rings

Proof-Loaded to 2X the Working Load Limit Designed for Applications Where the Swivel Lifting Ring is Frequently Installed and Removed Installation Lugs Used to Easily Tighten or Loosen the Unit with a Striking Tool or Pipe Markings: X100 Brand, WLL, Conformity, Size...