View the 7 x 7 x 7 Cable-Laid Wire Rope
Technical Resources:
| CERTEX Cat. Ref. No. | Diameter Inches | Construction | Approx. Weight per Foot, Pounds | Breaking Strength, tons* |
|---|---|---|---|---|
| CX01-0206 | 3/4 | 7 x 7 x 19 | .88 | 21.4 |
| CX01-0207 | 7/8 | 7 x 7 x 19 | 1.19 | 28.4 |
| CX01-0208 | 1 | 7 x 7 x 19 | 1.56 | 36.2 |
| CX01-0209 | 1 1/8 | 7 x 7 x 19 | 1.94 | 44.7 |
| CX01-0210 | 1 1/4 | 7 x 7 x 19 | 2.39 | 53.7 |
*Listed for comparison only. Actual operating loads may vary, but should never exceed 20% of catalog Breaking Strength.
**Read important wire rope warnings and information.
NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information preceding wire rope section.
WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Capacity Range: 1t ~ 10t Heavy Duty Quick Install Push Type Trolley Simple Installation, No Special Tools Required Fits both ‘S’ beams and ‘W’ beams Low Profile Design Corrosion Resistant Stainless Steel Plungers Corrosion Resistant Double Sealed Bearings Meets...
Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...
Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...
Solid carbon steel design Adjustable to fit various beam widths with traditional spacers Wheels of the units fit both I-beams and H-beams Trolley wheels are coated for corrosion resistance With anti-drop plates 100% stainless steel spark resistant & corrosion...
