Technical Resources:
OZ Lifting Beam Clamp
Robust all-steel construction Super-quick adjustment to most I-, S-, and W-beams Durable baked enamel paint protection Stainless steel ID tag Individual serial number and test certificate
Categories
7 x 19 Stainless Steel Wire Rope Type 316
| CERTEX Cat. Ref. No. | Size | Approx. Weight per 1000 ft. Pounds | Breaking Strength Pounds* |
|---|---|---|---|
| CX01-0185 | 1/8″ | 29 | 1,670 |
| CX01-0186 | 3/16″ | 65 | 3,565 |
| CX01-0187 | 1/4″ | 110 | 5,875 |
| CX01-0188 | 5/16″ | 173 | 8,825 |
| CX01-0189 | 3/8″ | 243 | 11,760 |
*Listed for comparison only. Actual operating loads may vary, but should never exceed 20% of catalog Breaking Strength.
**According to MIL-W-83420D, with exceptions. Meeting Federal Specification RR-W-410D.
NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information preceding wire rope section.
WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Related Products
OZ Lifting USA Push Beam Trolleys
Fastest adjusting trolley requiring no tools to install Anti-drop plate ensures safe load handling Lightweight robust construction Durable baked enamel provides protection Fits to most I-, S-, and W-beams RoHS-compliant zinc-plated finish Glow-in-the-dark decals...
OZ Lifting USA Beam Clamps
Robust all-steel fully-welded construction Super-quick adjustment to most I-beams ROHS-compliant zinc-plated finish Permanent engraved load rating Individual serial number and test certificate Made in USA
OZ Lifting Electric Builder’s Hoists
Lightweight and compact design for convenient mounting Automatic shut-off when rope reaches limit arm Dynamic and mechanical brake provides instant, safe braking Upper and lower limit switches for additional safety Sensor arm for motor shut-off to prevent reverse...