Certex Logo

Categories

7 x 19 Clear Vinyl Coated Stainless Cable Type 304

CERTEX Cat. Ref. No. Cable Diameter Coated to Approx. Weight per 1000 ft. Pounds Breaking Strength Pounds* Construction
CX01-0219 1/8″** 3/16″ 36.2 1,760 7 x 19
CX01-0220 3/16″** 1/4″ 77.5 3,700 7 x 19
CX01-0221 1/4″** 5/16″ 123.0 6,400 7 x 19
CX01-0222 5/16″** 3/8″ 197.0 9,000 7 x 19
CX01-0223 3/8″** 7/16″ 270.0 12,000 7 x 19

Also available on special order: nylon and vinyl in various colors.
Approx. 3 weeks delivery.
* Listed for comparison only. Actual operating loads may vary, but should never exceed 20% of catalog Breaking Strength.
** Uncoated cable according to MIL-W-83420D, with exceptions.
Uncoated cable meets Federal Specification RR-W-410D.

NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information preceding wire rope section.

WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Steel Pipe Grab Model S

Caldwell Steel Pipe Grab Model S

Excellent for cast iron, steel pipe, tubing, and other cylindrical objects. Product Features: Heavy duty automatic clamping design Outriggers stabilize the pipe during lift No blocking is required The operator only has to guide the clamp into place Pipes are handled...

Caldwell Steel Pipe Grab Model S

Caldwell C-3 Pipe Grab Model C

Excellent for cast iron, steel pipe, tubing, and other cylindrical objects. Product Features: Heavy duty automatic clamping design Outriggers stabilize the pipe during lift No blocking is required The operator only has to guide the clamp into place Pipes are handled...

X100® Swivel Eye Hoist Hook with Bronze Bushing

X100® Swivel Eye Hoist Hook with Bronze Bushing

• Rated for overhead lifting • Made from Alloy Steel • Properly marked with the Working load limit and MFR code • NOT designed to swivel under load • Comes with latch assembled • Replacement latches available