SHOT BLAST FINISH
| STOCK NUMBER | SIZE | MATERIAL DIAMETER | INSIDE WIDTH | INSIDE LENGTH | WORKING LOAD LIMIT (LBS.) | FEET/DRUM | WEIGHT/FOOT(LBS.) |
|---|---|---|---|---|---|---|---|
| X100281 | 9/32” | 0.283” | .420” | 0.85” | 4,300 | 800’ | 0.74 |
| X100312 | 5/16” | 0.315” | .500” | 1.04” | 5,700 | 550’ | 0.94 |
| X100375 | 3/8” | 0.394” | .575” | 1.26” | 8,800 | 400’ | 1.48 |
| X100500 | 1/2” | 0.512” | .768” | 1.64” | 15,000 | 200’ | 2.55 |
| X100625 | 5/8” | 0.630” | .930” | 2.00” | 22,600 | 150’ | 3.83 |
| X100750 | 3/4” | 0.750” | 1.15” | 2.50” | 35,300 | 100’ | 6.21 |
Our X100 pre-made and certified Lifting Chain is low weight, but high strength alloy steel with comparatively high carbon content. Quenched and tempered before proof testing, the ultimate tensile strength of Our alloy chain is double that of ordinary steel chain. Note: Grade 100 alloy chain is approved by OSHA for overhead lifting.
Our X100 pre-made and certified Alloy lifting chain meets or exceeds all existing OSHA, Government, NACM, and ASTM requirements. Buying chain and components for a chain sling? Check out Our pre-made and certified chain slings built with this GRADE 100 lifting chain. Offered in single-, double-, triple-, and quadruple-legs and in various configurations.
Chain embossed with grade marking every 36″.
| Temprature | Grade of Chain | ||||
|---|---|---|---|---|---|
| Grade 80 | Grade 100 | ||||
| (°F) | (°C) | Reduction working Load Limit WHILE AT Temperature | Permanent Reduction of Working Load Limit AFTER EXPOSURE to Temperature | Reduction of Working Load Limit WHILE AT Temperature | Permanent Reduction of Working Load Limit AFTER EXPLOSURE to Temperature |
| Below 400 | Below 204 | None | None | None | None |
| 400 | 204 | 10% | None | 15% | None |
| 500 | 260 | 15% | None | 25% | 5% |
| 600 | 316 | 20% | 5% | 30% | 15% |
| 700 | 371 | 30% | 10% | 40% | 20% |
| 800 | 427 | 40% | 15% | 50% | 25% |
| 900 | 482 | 50% | 20% | 60% | 30% |
| 1000 | 538 | 60% | 25% | 70% | 35% |
| Over 1000 | Over 538 | OSHA 1910. 184 requires all slings exposed to temperatures over 1000 °F to be removed from service | |||
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...
Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...
The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...
The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...
