Certex Logo

Categories

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links,
with intermediate struts that can be bolted into the assembly to achieve different spans.
MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft increments.

  • Rated at 600 tonnes SWL at 36ft span
    (60° BSA). See Load Table for SWL at longer spans.
  • ‘Base to Sling’ angle, α, 45 degrees or more.
  • End Units & Drop Links are rated at 300 tonnes WLL each (600 tonnes combined capacity).
  • Bolt tightening torque: 184 Pound-Foot. Spanner size required: 36mm
  • Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner

 

Part Ref. Description Weight/item
P1 End Unit 1261 lbs
P2 Drop Link 331 lbs
P3 20ft Strut 3049 lbs
P4 10ft Strut 1744 lbs
P5 5ft Strut 1094 lbs
P6 4ft Strut 963 lbs
P7 3ft Strut 832 lbs
P8 2ft Strut 701 lbs
P9 1ft Strut 571 lbs
P10 400t Wide Body Shackle 1279 lbs
P11 300t Wide Body Shackle 794 lbs
P12 M24 x 90 Grade 8.8 HT Bolts*, Nuts & Washers

● Personnel using this system should be suitably trained, competent and have a clear
understanding of Safe Slinging procedures.
● The use of Modulift equipment must be in accordance with the procedures laid down in
‘ASME B30.20 – 2013’.
Never exceed stated SWL – Adhere to SWL in Table 2 for particular sling angle used.
The top sling length is critical to the safe use of the spreader – Adhere to Table 2.
● Ensure Drop Links hang down, and smaller shackles are connected to bottom hole of Drop Link.
● Do not under any circumstances hang load(s) from the tube or flanges – the spreader is designed for
axial compression, not bending.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...