Certex Logo

Categories

RUD PSA-VRS UNC Fall Protection Anchorage Point

RUD PSA-VRS UNC Fall Protection Anchorage Point
  • WLL range 1 – 2 persons
  • Non-removable special bolt
Type WLL (Persons) Weight (kg/unit) Dimensions (mm) M N (IN)
T B C D E G I K L
PSA-VRS-STARPOINT 1/2″-13UNC 1 0.2 42 13 10 30 30 34 19.8 56 18 1/2″ 13UNC 5/16″
PSA-VRS-STARPOINT 5/8″-11UNC 1-2 0.32 49 15 15 35 35 40 23.5 65 24 5/8″-11UNC 3/8″
PSA-VRS-STARPOINT 3/4″-10UNC 1-2 0.56 58 18 17 40 42 54 29.3 75 30 3/4″-10UNC 1/2″

PSA-Fall arrest anchor points are no lifting points in a conventional sense. They are used as anchor points for personal fall arrest systems (PSA) acc. to EN 363:2008. After installation, harnesses can be attached into them. These anchor points can also be permanently installed, f.e. at a building to allow to attach fall arrest safety harnesses.
These products are tested by a notified institution of DGUV (Deutsche Gesetzliche Unfallversicherung) with the evidence of the in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5 for lifting points required forces. They are corresponding to a “anchor point” according to European edict 2016/425 and the DIN 795:2012-10 resp. DIN CEN / TS 16415:2013-4 and they are marked with the number of load bearing persons (=1 or 2 persons).

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

X100® PlateMate™ Swivel Lifting Rings

X100® PlateMate™ Swivel Lifting Rings

Proof-Loaded to 2X the Working Load Limit Designed for Applications Where the Swivel Lifting Ring is Frequently Installed and Removed Installation Lugs Used to Easily Tighten or Loosen the Unit with a Striking Tool or Pipe Markings: X100 Brand, WLL, Conformity, Size...