Leading the lifting & rigging industry
Certex Logo

Categories

8 x 19 Rotation Resistant Wire Rope

8 x 19 Rotation Resistant Wire Rope

Characteristics: Inner and outer strands are laid in opposing directions to counter rotation. More easily damaged in service than other ropes. Can be used for multiple part lifting.

Technical Resources:


EMAIL PAGE

EMAIL PAGE

VIEW IN CATALOG

VIEW IN CATALOG

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
8 x 19 Rotation Resistant Rope
CERTEX Cat. Ref. No. Diam., in. Nominal Strength,* Tons Approx. Wt./Ft., lb.
ΕΙΡ IPS
CX01-0308 7/16 8.97 7.80 0.36
CX01-0309 1/2 11.7 10.2 0.47
CX01-0310 9/16 14.7 12.8 0.60
CX01-0311 5/8 18.1 15.7 0.73
CX01-0312 3/4 25.9 22.6 1.06
CX01-0313 7/8 35.0 30.5 1.44
CX01-0314 1 45.5 39.6 1.88
CX01-0315 1 1/8 57.3 49.8 2.39
CX01-0316 1 1/4 70.5 61.3 2.94
CX01-0317 1 3/8 84.9 73.8 3.56
CX01-0318 1 1/2 100.0 87.3 4.24

*Acceptance strength is not less than 2 1/2% below the nominal breaking strengths listed.
Note: These strengths apply only when a test is conducted with both ends fixed.
When in use, the strength of these ropes may be reduced if one end is free to rotate.

NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information.

WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!

Products

Class Comparison

Information

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant QBT Quick Beam Trolley

Elephant QBT Quick Beam Trolley

Capacity Range: 1t ~ 10t Heavy Duty Quick Install Push Type Trolley   Simple Installation, No Special Tools Required Fits both ‘S’ beams and ‘W’ beams Low Profile Design     Corrosion Resistant Stainless Steel Plungers Corrosion Resistant Double Sealed Bearings Meets...

Elephant Geared Type Beam Trolleys

Elephant Geared Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Push Type Beam Trolleys

Elephant Push Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Grippa Push & Geared Trolleys

Elephant Grippa Push & Geared Trolleys

Solid carbon steel design Adjustable to fit various beam widths with traditional spacers Wheels of the units fit both I-beams and H-beams Trolley wheels are coated for corrosion resistance With anti-drop plates 100% stainless steel spark resistant & corrosion...