Leading the lifting & rigging industry
Certex Logo

Categories

Screw Pin Shackle Hex Head Pin or Marine Hex Head – No. 264

Screw Pin Shackle Hex Head Pin or Marine Hex Head - No. 264
  • Skookum Gold Standard Forgings
  • All sizes are forged, quenched and tempered.
  • Enamel, zinc plate or galvanized finish.
  • Custom sizes & materials (stainless steel, etc.) are available upon request.
  • Superior strength, hardness & uniformity.
  • Size & working load permanently imprinted.
  • Material heat codes imprinted on bale and pin.

EMAIL PAGE

EMAIL PAGE

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
SIZE
(lNCHES)		 WLL1
(TONS) 		 WEIGHT2
(LBS.)		 STOCK # DIMENSIONS (IN)
#264 D W L B R P
1/2 5.00 1.00 626404 0.63 0.81 ± .125 1.88 ± .125 1.28 1.44 0.63
5/8 7.00 2.00 626405 0.75 1.06 ± .0625 2.50 ± .125 1.75 1.63 0.75
3/4 9.00 3.00 626406 0.88 1.25 ± .0625 2.88 ± .25 2.00 1.84 0.88
7/8 12.00 4.00 626407 1.00 1.44 ± .0625 3.31 ± .25 2.28 2.13 1.00
1 16.00 5.50 626408 1.13 1.69 ± .0625 3.75 ± .25 2.69 2.25 1.13
1 1/8 18.00 8.00 626409 1.13 1.81 ± .0625 4.25 ± .25 2.94 2.63 1.25
1 1/4 21.00 11.00 626410 1.25 2.03 ± .0625 4.63 ± .25 3.25 3.00 1.38
1 3/8 26.00 14.00 626411 1.38 2.25 ± .125 5.25 ± .25 3.63 3.25 1.50
1 1/2 31.00 18.00 623412 1.50 2.38 ± .125 5.75 ± .25 3.88 3.44 1.63
1 5/8 35.00 23.00 626413 1.63 2.63 ± .125 6.25 ± .25 4.63 4.00 1.75
1 3/4 41 .00 30.00 626414 1.75 2.88 ± .125 7.00 ± .25 5.00 4.25 2.00
2 52.00 42.00 626416 2.00 3.25 ± .125 7.75 ± .50 5.75 5.00 2.25
2 1/4 67.00 57.00 623418 2.25 3.88 ± .125 9.25 ± .50 6.50 5.50 2.50
2 1/2 82.00 85.00 626420 2.50 4.13 ± .125 10.50 ± .50 7.25 5.88 2.75
2 3/4 104.00 100.00 626422 2.75 4.50 ± .125 11.50 ± .75 7.50 6.25 3.00
3 117.0 136.00 626424 3.00 5.00 ± .125 13.00 ± .75 7.88 6.50 3.25
3 1/2 150.00 256.00 – 3.50 5.75 ± .25 15.00 ± .75 9.50 8.00 3.75
4 175.00 310.00 – 4.00 6.55 ± .25 17.00 ± .75 11.00 9.25 4.25

1 Ton=2,00lbs – Design factor is 5 to 1.
2 Weights vary slightly with style of shackle pin used. Specifications subject to change without notice.

WARNING: Misuse of rigging equipment can result in serious injury up to and including loss of life. Only competent trained professionals should use Skookum products.
Thoroughly inspect oil equipment before each and every use and never use damaged or worn products. Skookum disclaims any lability resulting from the misuse of its products. Please take a moment to carefully review our maintenance and warnings page for more information.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...