Certex Logo

Categories

Crosby® Light Champion 419 Snatch Block with Shackle

Crosby® Light Champion  419 Snatch Block with Shackle

419 With Shackle

  • Forged alloy heat treated hooks.
  • Forged steel swivel tees, yokes and shackles
  • Hook and shackle assemblies on 4 1/2” through 14” sizes can be interchanged.
  • Can be furnished with bronze bushings or roller bearings.
  • Opening feature permits insertion of rope while block is suspended from gin-pole.
  • 3” thru 18” 418 and 419 blocks have exclusive bolt retaining spring to assure no lost bolts.
  • Can be furnished with SS-4055 hook latch.
  • Pressure lube fittings.
  • Fatigue rated.
  • 3” – 10” feature dual rated wireline sheaves.
Sheave Diameter (in.) Bearing Code 419 with Shackle Wire Rope Size (in.) †† Working Load Limit * (metric tons) Weight Each (lbs.) Replacement Sheave
CERTEX Cat. Ref. No. Crosby Stock No. 419 with
Shackle
CERTEX Cat. Ref. No. Crosby Stock No.
*3 BB CX13-0025 109091 5/16-3/8 2 4 CX13-0062 46014
**3 BB CX13-0026 †109037 5/16-3/8 2 4 CX13-0063 460147
**4 1/2 BB CX13-0027 109064 3/8-1/2 4 12 CX13-0064 2000232
6 BB
RB
CX13-0028 CX13-0029 109126 109153 5/8-3/4 8 27.8 CX13-0065 CX13-0066 460815
472688
8 BB
RB
CX13-0030 CX13-0031 109224 109251 5/8-3/4 8 34 CX13-0067
CX13-0068
461164
473277
10 BB
RB
CX13-0032
CX13-0033
109322 109359 5/8-3/4 8 42 CX13-0069
CX13-0070
461805
473776
12 BB
RB
CX13-0034
CX13-0035
202961 169347 5/8 8 49 CX13-0071
CX13-0072
462270
474141
12 BB
RB
CX13-0036 CX13-0037 109420 109457 3/4 8 49 CX13-0073 CX13-0074 462284
474150
14 BB
RB
CX13-0038 CX13-0039 169356 167857 5/8 8 56 CX13-0075 CX13-0076 463625
474150
14 BB
RB
CX13-0040 CX13-0041 109527 109545 3/4 8 56 CX13-0077 CX13-0078 463634
474775
16 BB
RB
CX13-0042 CX13-0043 203041 203087 3/4 15 135 CX13-0079 CX13-0080 4100056
4200028
16 BB
RB
CX13-0044 CX13-0045 109607 109625 7/8 15 135 CX13-0081 CX13-0082 4100065
4200037
18 BB
RB
CX13-0046
CX13-0047
203130 203176 7/8 15 155 CX13-0083 CX13-0084 464571
475792
18 BB
RB
CX13-0048
CX13-0049
109643 109661 1 15 155 CX13-0085 CX13-0086 4104640
6000000

* Ultimate Load is 4 times the Working Load Limit.
** Available in Bronze Bushed only. 3” and 4 1/2” have self lubricating Bronze Bushing.
† Fitted with 1 1/4” I D Swivel Eye.
†† May be furnished in other wire rope sizes.
NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...