3/4, 1, 1 1/2, 2, 2 3/4, 3, 6, and 9 Ton capacity
The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair.
| Cap. (Tons) | CERTEX Cat. Ref. No. | Harrington Code | Headroom C (in) | Std. Lift (ft) | Pull to Lift Load* (lbs) | a (in) | b (in) | D* (in) | e (in) | f (in) | g (in) | Load Chain Diameter (mm) x Chain Fall Lines | Net Weight (lbs) | Shipping Weight Approx. (lbs) | Weight for Additional One Foot of Lift (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3⁄4 | CX11-0415 | LB008 | 11.0 | 5 | 54 (36) | 5.7 | 4.7 | 9.6(14.4) | 3.8 | 1.6 | 0.9 | 5.6 x 1 | 13 | 13 | 0.5 |
| 1 | CX11-0416 | LB010 | 11.8 | 5 | 72 (46) | 5.7 | 4.7 | 9.6(14.4) | 3.8 | 1.6 | 1.1 | 5.6 x 1 | 13 | 14 | 0.5 |
| 1 1⁄2 | CX11-0417 | LB015 | 13.2 | 5 | 64 (45) | 6.3 | 5.0 | 10.4(14.4) | 3.9 | 1.5 | 1.3 | 7.1 x 1 | 18 | 18 | 0.7 |
| 2 | CX11-0418 | LB020 | 14.8 | 5 | 59 (42) | 6.8 | 5.9 | 10.4(14.4) | 4.0 | 1.8 | 1.4 | 8.8 x 1 | 25 | 26 | 1.1 |
| 2 3⁄4 | CX11-0540 | LB028 | 14.8 | 5 | 81 (57) | 6.8 | 5.9 | 10.4(14.4) | 4.0 | 1.8 | 1.4 | 8.8 x 1 | 25 | 26 | 1.1 |
| 3 | CX11-0419 | LB030 | 15.6 | 5 | 69 | 7.5 | 6.3 | 16.3(16.9) | 4.4 | 1.8 | 1.5 | 10.0 x 1 | 33 | 35 | 1.5 |
| 6 | CX11-0420 | LB060 | 21.3 | 5 | 72 | 7.5 | 8.5 | 16.3(16.9) | 4.4 | 2.3 | 2.0 | 10.0 x 2 | 57 | 60 | 3.2 |
| 9 | CX11-0421 | LB090 | 26.8 | 5 | 78 | 7.5 | 12.0 | 16.3(16.9) | 4.4 | 4.1 | 2.9 | 10.0 x 3 | 88 | 93 | 4.7 |
*Figures in parentheses are for hoists with the optional load limit warning handle
• Rugged, all-steel construction that actually weighs less than comparable aluminum models.
• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. Includes two brake pawls for additional reliability.
• Enjoy protection against dirt and moisture with a totally enclosed brake mechanism.
• Ensure long life with machined, heat-treated, split load double reduction gears.
• Operate in close quarters with short steel handle and 15-degree recovery strokes.
• Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load.
• Equipped with standard rubber grip for non-slip operation.
• Load limit warning handle
• Top hook extender
• Point load hook
• Inspection hook
• Bullard® and Shur-Loc® hooks
• 5-foot lift is standard, 10-, 15- and 20-foot lifts also stocked; nonstandard lifts available as well.
• Grade 100 heat-treated load chain is nickel plated for corrosion resistance.
• Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. Top and bottom hooks rotate 360°.
• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity in accordance with ASME B30.21 requirements.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...
Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...
The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...
The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...
