Certex Logo

Categories

Crosby® SHUR-LOC® S-1326 Swivel Hook

Crosby® SHUR-LOC® S-1326 Swivel Hook

• Forged Alloy Steel — Quenched and Tempered.
• Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
• Recessed trigger design is flush with the hook body, protecting the trigger from potential damage.
• Easy to operate with enlarged thumb access.
• Positive Lock Latch is Self-Locking when hook is loaded.
• Rated for both Wire Rope, and use with Grade 80/100 Chain.
G-414 Heavy Thimble should be used with wire rope slings.
• Trigger repair Kit available (S-4316). Consists of spring, roll pin and trigger.
S-13326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load.

 

S-1326 SHUR-LOC® Swivel Hooks

• Suitable for infrequent, non-continuous rotation under load.

Chain Size S-1326 Stock No. Grade 100 Alloy Chain Working Load Limit (lbs.) 4:1* Weight Each (lbs.) Dimensions (in.)
(in.) (mm) A B C D E F H J L AA
6 1004304 3200 1.26 1.50 1.32 6.13 .79 2.60 .67 .50 .63 1.13 1.50
1/4-5/16 7-8 1004313 5700 2.62 1.75 1.59 7.60 1.10 3.50 .87 .63 .81 1.38 2.00
3/8 10 1004322 8800 4.70 2.00 1.73 8.83 1.17 4.39 1.10 .75 .94 1.75 2.50
1/2 13 1004331 15000 8.64 2.50 2.38 11.20 1.67 5.45 1.26 1.00 1.16 2.11 3.00
5/8 16 1004340 22600 17.00 2.75 2.53 12.98 2.05 6.56 1.50 1.13 1.50 2.49 3.50
3/4 18-20 1004349 35300 24.00 2.83 2.52 17.42 2.22 7.76 2.01 1.10 2.03 3.52 5.00
7/8 22 1004358 42700 29.00 3.44 3.19 16.47 2.45 8.75 2.26 1.30 2.20 3.83 6.00

* Minimum Ultimate Load is 4 times the Working Load Limit.

• S-13326 Swivel Hook utilizes antifriction bearing design which allows hook to rotate freely under load.
• Fatigue rated.
• The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.1431(g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).
• “Look for the Platinum Color – Crosby Grade 100 Alloy Products”.
• U.S. Patent 5,381,650 and foreign equivalents.

Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.10.4(b)(5)(c)2009.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Associated Wire Rope Snatch Blocks

Associated Wire Rope Snatch Blocks

Ropeblock Snatch Blocks are an excellent choice in most rigging and lifting plans. Durability and ease of use are some of the key benefits in addition to: Design Factor of Safety of 4:1 Lubricated bronze bushings Eye or oblong eye connection Sheaves, featuring...

Associated Wire Rope Standard Reeve Crane Blocks

Associated Wire Rope Standard Reeve Crane Blocks

Blocks shown in this section may be used on a wide variety of land based cranes such as mobile and crawler cranes. Standard Reeve Blocks are an excellent choice where frequent easy block change is not a required main feature, or lifting height is limited: Double...

Associated Wire Rope Round Overhaul Balls

Associated Wire Rope Round Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...

Associated Wire Rope Overhaul Balls

Associated Wire Rope Overhaul Balls

The weight of the overhaul balls in this segment are based on average boom lengths and efficiency loss in mobile and crawler cranes. The low friction and easy to access hook swivel design makes the OHB series an excellent choice for a wide variety of crane...