Leading the lifting & rigging industry
Certex Logo

Categories

X100® Drop Forged – Hot Galvanized Wire Rope Clips

X100® Drop Forged - Hot Galvanized Wire Rope Clips

Never Saddle a Dead Horse

When using wire rope clips, (also known as wire rope clamps) always apply the saddle of clip to the "live side" or load bearing side of the cable assembly.

APPROVED FOR OVERHEAD LIFTING

Methods Of Application

1. Always apply the saddle of the wire rope clip to the live end (non turnback end) of the wire rope or cable. “Never Saddle a Dead Horse.” Turn back the specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope.

2. Apply the next clip as near the loop as possible. Turn on the nuts but do not tighten.

3. Space additional clips equally between the first two. Take up rope slack. Tighten all nuts evenly on all clips.


EMAIL PAGE

EMAIL PAGE

WARNINGS & CAUTIONS

WARNINGS & CAUTIONS
SIZE STOCK NUMBER WEIGHT/100 PIECES MINIMUM CLIPS REQUIRED TORQUE IN LBS. FT.* TURN BACK LENGTH
1/8″ DFWRC125 5 lbs. 2 4.5 lbs. 3 1/4″
3/16″ DFWRC187 10 lbs. 2 7.5 lbs. 3 3/4″
1/4″ DFWRC250 18 lbs. 2 15 lbs. 4 3/4″
5/16″ DFWRC312 31 lbs. 2 30 lbs. 5 1/4″
3/8″ DFWRC375 46 lbs. 2 45 lbs. 6 1/2″
7/16″ DFWRC437 73 lbs. 3 65 lbs. 7″
1/2″ DFWRC500 73 lbs. 3 65 lbs. 11 1/2″
9/16″ DFWRC562 96 lbs. 3 95 lbs. 12″
5/8″ DFWRC625 104 lbs. 3 95 lbs. 12″
3/4″ DFWRC750 150 lbs. 4 130 lbs. 18″
7/8″ DFWRC875 244 lbs. 4 225 lbs. 19″
1″ DFWRC100 270 lbs. 5 225 lbs. 26″
1 1/8″ DFWRC1125 310 lbs. 6 225 lbs. 34″
1 1/4″ DFWRC1250 460 lbs. 7 360 lbs. 44″
1 3/8″ DFWRC1375 520 lbs. 7 360 lbs. 44″
1 1/2″ DFWRC1500 590 lbs. 8 360 lbs. 54″
1 3/4″ DFWRC1750 980 lbs. 8 590 lbs. 58″

*Torque values shown are based on clean, unlubricated threads. Wire rope clips are not designed for load carrying purposes, therefore working load limits have not been established.

Note: Malleable Wire Rope Clips made according to Federal Specification FF-C-450 G, Type 1, Class 2. Forged Wire Rope Clips made according to Federal Specification FF-C-450 G, Type 1, Class 1.

Wire Rope Terminations Information

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant QBT Quick Beam Trolley

Elephant QBT Quick Beam Trolley

Capacity Range: 1t ~ 10t Heavy Duty Quick Install Push Type Trolley   Simple Installation, No Special Tools Required Fits both ‘S’ beams and ‘W’ beams Low Profile Design     Corrosion Resistant Stainless Steel Plungers Corrosion Resistant Double Sealed Bearings Meets...

Elephant Geared Type Beam Trolleys

Elephant Geared Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Push Type Beam Trolleys

Elephant Push Type Beam Trolleys

Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...

Elephant Grippa Push & Geared Trolleys

Elephant Grippa Push & Geared Trolleys

Solid carbon steel design Adjustable to fit various beam widths with traditional spacers Wheels of the units fit both I-beams and H-beams Trolley wheels are coated for corrosion resistance With anti-drop plates 100% stainless steel spark resistant & corrosion...