Certex Logo

Categories

Pyramex – RJ31 Series

Pyramex - RJ31 Series


ANSI
Waterproof – ANSI 107-2020: AATCC 127 // Polyester shell with zip-out polar fleece liner // Elastic band at the waist and wrists // Concealed detachable hood // Cell phone/radio chest pocket with clear panel on outside shell // Mic tabs and pencil pocket // Sizes S-5XL
RJ3110 / RJ3120

MATERIALS

Jacket: Polyurethane (PU) coated waterproof polyester shell
Interior: 220gsm fleece, removable Nylon lined sleeves
Inner Lining: 210T taffeta
Reflective Tape: Generic silver
Waist & Wrists: Waterproof elastic band

CLOSURE

Front: SBS Zipper
Zipper Tape: 100% polyester fabric
Zipper Teeth: Resin
Zipper Slider: Metal
Hood: Drawstring

REFLECTIVE STRIPING

One 2” silver reflective stripe applied horizontally across lower chest dividing black material from lime material
Two 2” silver reflective stripes applied vertically from top of horizontal stripe, over shoulders, to top of horizontal stripe on back
Two 2” silver reflective stripes applied around each sleeve at elbow

POCKETS

Two outer lower slash pockets: 9” x 9”
One outer left chest clear badge hook and loop pocket: 3.5” x 5”
One outer right chest zipper pocket: 6”
One outer left arm pencil pocket: 3” x 5”
One inner left chest hook and loop pocket: 6” x 7”
One inner right chest zipper pocket: 8.5” x 6”
One inner right chest hook and loop pocket: 4” x 5.5”

JACKET MEASUREMENTS

SIZE S M L XL 2X 3X 4X 5X
CHEST MEASUREMENT 26″ 27″ 28″ 29″ 30″ 31″ 33″ 34.5″

Jacket measurements are taken while garment is lying flat. Please note: some size variation may occur.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell 2t Adjustable Height & Span Gantry Model K90-2

Caldwell 2t Adjustable Height & Span Gantry Model K90-2

Features: Adjustable span standard on 10'-16' spans through 5 tons Bolted connections on spans of 20'-24' and all 8 ton units Heavy duty supported leg design Balanced design allows for easy rolling, even under load Conforms to AISC, OSHA, and CMAA specifications...

Caldwell Adjust-A-Leg Two Point Lift – Model AL2

Caldwell Adjust-A-Leg Two Point Lift – Model AL2

Caldwell’s patented design to safely lift unbalanced loads has evolved a bit since 1954, but not much. When it’s right, it’s right. Features: Allows crane hook to be over the load's center of gravity in unbalanced or non-symmetrical 2-point lifts Quickly adjusts to...

Caldwell Adjust-A-Leg Four Point Lift – Model AL4

Caldwell Adjust-A-Leg Four Point Lift – Model AL4

Get greater adjustment and flexibility with the 4-point lift. Unbalanced or non-symmetrical loads can now be handled safely and efficiently. Features: Allows crane hook to be over the load's center of gravity in unbalanced or non-symmetrical 4-point lifts Quickly...

Caldwell Adjustable Spreader Beam Model 32

Caldwell Adjustable Spreader Beam Model 32

Caldwell’s patented design to safely lift unbalanced loads has evolved a bit since 1954, but not much. When it’s right, it’s right. Features: Ideal where headroom is not limited Adds stability to lift Telescopic spread standard Spread adjusts in 1" increments...