Certex Logo

Categories

Grade 80 Binder Chain with Grab Hooks

Grade 80 Binder Chain with Grab Hooks

• Every link has been proof tested to 2 times the working load
• Grade 80 alloy chain is used when higher working loads or DOT regulations require stronger chain
• DOT compliant
• As pictured – for cargo control only

SIZE STOCK NUMBER GRADE/FINISH WORKING LOAD LIMIT (LBS.) WEIGHT/PIECE (LBS.) PIECES/DRUM
5/16” X 16’ G80BC312X16 Gr 80/Black Lacquer 4,500 16 25
5/16” X 20’ G80BC312X20 Gr 80/Black Lacquer 4,500 23 25
5/16” X 25’ G80BC312X25 Gr 80/Black Lacquer 4,500 26 20
3/8” X 16’ G80BC375X16 Gr 80/Black Lacquer 7,100 26 25
3/8” X 20’ G80BC375X20 Gr 80/Black Lacquer 7,100 32 20
3/8” X 25’ G80BC375X25 Gr 80/Black Lacquer 7,100 37 15
1/2” X 10’ G80BC500X10 Gr 80/Black Lacquer 12,000 46 10
1/2” X 20’ G80BC500X20 Gr 80/Black Lacquer 12,000 52 10
1/2” X 25’ G80BC500X25 Gr 80/Black Lacquer 12,000 65 10

Custom lengths and hooks available upon request. Larger sizes available upon request.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Adjustable Lifting Beam, Economy Model 17

Caldwell Adjustable Lifting Beam, Economy Model 17

Model 17 Adjustable Lifting beam features an adjustable bail and lifting points in 6" incerments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions. Features: Bail adjusts horizontally for lifting unbalanced loads Provides...

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Dura-Lite Model 416 is the composit version of Caldwell's Model 16 Adjustable Lifting Beam. Choose for corrosive enviroments, areas where sparks are a concern, or when a lighter beam allows you to pick a heavier load. Features: Lightweight beam gives you additional...

Caldwell Die Lifting Tongs Model DLT

Caldwell Die Lifting Tongs Model DLT

Support Tongs are used for repeat pickups of constant-sized containers such as boxes and crates. The arm design allows significant height on the lifted item and the Auto-Latch mechanism allows the operator to position, engage, lift, move, place, and disengage the...

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

It's all about the pivoting wedge on this unit. By maneuvering that wedge in between two stacked coils, an operator can separate them and begin a tilt, allowing the rest of the hook to slide in and do its job. Features: Easy horizontal to vertical upending of coils...