Certex Logo

Categories

Renfroe JPA Vertical Lifting Locking Clamps

Renfroe JPA Vertical Lifting Locking Clamps

Model JPA 

The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock.
Permits side loading of lifting shackle to 90 degrees by derating of clamp’s rated capacity.
Refer to FIGURE 1 for derated capacities.

Specifications (In Inches)

CERTEX Cat. Ref. No Rated Capacity Ton Plate Thickness A B C D E F G H J K Weight (in pounds)
CX12-0252 0 – 5/8 2 3/4 6 1/2 12 2 3/8 5 5/8 3 1/4 2 1/4 1/2 3/4
CX12-0253 1/2 1/2 – 1 2 3/4 6 1/2 12 2 3/8 6 3 1/4 2 1/4 1/2 3/4 12
CX12-0254 3/4 – 1 1/4 2 3/4 6 1/2 12 2 3/8 6 1/4 3 1/4 2 1/4 1/2 3/4
CX12-0255 1 1/4 – 1 3/4 2 3/4 6 1/2 12 2 3/8 6 3/4 3 1/4 2 1/4 1/2 3/4
CX12-0256 0 – 3/4 3 3/8 7 3/4 13 3/4 2 5/8 7 3 1/2 2 5/8 5/8 3/4
CX12-0257 1/2 – 1 3 3/8 7 3/4 13 3/4 2 5/8 7 1/4 3 1/2 2 5/8 5/8 3/4
CX12-0258 1 3/4 – 1 1/4 3 3/8 7 3/4 13 3/4 2 5/8 8 3 1/2 2 5/8 5/8 3/4 20
CX12-0259 1 – 1 1/2 3 3/8 7 3/4 13 3/4 2 5/8 8 1/4 3 1/2 2 5/8 5/8 3/4
CX12-0260 1 1/2 – 2 3 3/8 7 3/4 13 3/4 2 5/8 8 3/4 3 1/2 2 5/8 5/8 3/4
CX12-0261 0 – 1 3 5/8 9 1/2 17 3/8 3 1/2 8 3/4 4 1/2 3 3/4 1
CX12-0262 2 3/4 – 1 1/2 3 5/8 9 1/2 17 3/8 3 1/2 9 1/4 4 1/2 3 3/4 1 40
CX12-0263 1 1/4 – 2 3 5/8 9 1/2 17 3/8 3 1/2 9 3/4 4 1/2 3 3/4 1
CX12-0264 2 – 2 3/4 3 5/8 9 1/2 17 3/8 3 1/2 10 1/2 4 1/2 3 3/4 1
CX12-0265 3/16 – 1 1/4 4 3/8 11 1/2 20 1/8 3 1/2 9 1/4 4 1/2 3 1/4 1 1/2 1
CX12-0266 4 1 – 2 4 3/8 11 1/2 20 1/8 3 1/2 10 4 1/2 3 1/4 1 1/2 1 50
CX12-0267 2 4 3/8 11 1/2 20 1/8 3 1/2 11 4 1/2 3 1/4 1 1/2 1
CX12-0268 3 – 4 4 3/8 11 1/2 20 1/8 3 1/2 12 4 1/2 3 1/4 1 1/2 1
CX12-0269 1/4 – 1 3/8 4 7/8 12 3/8 20 7/8 3 1/2 10 3/4 4 3/4 3 3/4 1 1/2 1
CX12-0270 6 1 – 2 1/8 4 7/8 12 3/8 20 7/8 3 1/2 11 1/2 4 3/4 3 3/4 1 1/2 1 72
CX12-0271 2 – 3 1/8 4 7/8 12 3/8 20 7/8 3 1/2 12 1/2 4 3/4 3 3/4 1 1/2 1
CX12-0272 3 – 4 1/8 4 7/8 12 3/8 20 7/8 3 1/2 13 1/2 4 3/4 3 3/4 1 1/2 1
CX12-0273 3/8 – 1 1/2 5 3/8 12 3/4 22 5/8 3 3/4 12 1/8 5 1/4 4 1/4 2 1 1/2
CX12-0274 8 1 – 2 1/8 5 3/8 12 3/4 22 5/8 3 3/4 13 5 1/4 4 1/4 2 1 1/2 93
CX12-0275 2 – 3 1/8 5 3/8 12 3/4 22 5/8 3 3/4 14 5/8 5 1/4 4 1/4 2 1 1/2
CX12-0276 3 – 4 1/8 5 3/8 12 3/4 22 5/8 3 3/4 15 5/8 5 1/4 4 1/4 2 1 1/2

12, 16, 20, 25, 30 and 50 Ton capacities available upon request.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

 

Model JPA incorporates a pivoting shackle that permits side loading of the lifting shackle at 100 percent of rated capacity from vertical to 30 degrees, 75 percent of rated capacity between 30 and 45 degrees and 50 percent of rated capacity between 45 and 90 degrees.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Adjustable Lifting Beam, Economy Model 17

Caldwell Adjustable Lifting Beam, Economy Model 17

Model 17 Adjustable Lifting beam features an adjustable bail and lifting points in 6" incerments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions. Features: Bail adjusts horizontally for lifting unbalanced loads Provides...

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Dura-Lite Model 416 is the composit version of Caldwell's Model 16 Adjustable Lifting Beam. Choose for corrosive enviroments, areas where sparks are a concern, or when a lighter beam allows you to pick a heavier load. Features: Lightweight beam gives you additional...

Caldwell Die Lifting Tongs Model DLT

Caldwell Die Lifting Tongs Model DLT

Support Tongs are used for repeat pickups of constant-sized containers such as boxes and crates. The arm design allows significant height on the lifted item and the Auto-Latch mechanism allows the operator to position, engage, lift, move, place, and disengage the...

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

It's all about the pivoting wedge on this unit. By maneuvering that wedge in between two stacked coils, an operator can separate them and begin a tilt, allowing the rest of the hook to slide in and do its job. Features: Easy horizontal to vertical upending of coils...