Certex Logo

Categories

Klein Haven’s® Grip for Wire Rope

Klein Haven’s® Grip for Wire Rope

Designed for use when light, compact grip is desired and where conductor damage is not a factor. Gripping pressure of the knurled jaw is applied to 1/4” (6.35 mm) cable area.

1604-20L and 1625 series have a swing latch to help hold cable in the jaw.

CERTEX Cat. Ref. No. Klein Cat. No. Minimum Cable Size – inches (mm) Maximum Cable Size – inches (mm) Maximum Safe Load – lbs (kg) Approx. Weight Each – lbs. (kg)
CX05-0578 1625-20 1 B&S .28 (7.11) Wire Rope .75 (19.05) 8000 (3629) 3 1/2 (1.59)
CX05-0579 1625-20 7/8 1 B&S .38 (9.65) Wire Rope .88 (22.35) 8000 (3629) 3 1/2 (1.59)
CX05-0580 1625-20 1 1 B&S .50 (12.70) Wire Rope 1.00 (25.40) 8000 (3629) 3 1/2 (1.59)

OSHA requires that all hand tools and equipment be maintained in good working order and that they be free from damage caused by wear or abuse (OSHA Part 1910, Subpart P, Section 1910.242).

In addition, OSHA Part 1926, Subpart V, Section 1926.955, paragraph 7 (ii) and 8 specifically state that:
“The manufacturer’s load rating shall not be exceeded for stringing lines, pulling line sock connections, and all load-bearing hardware and accessories.
“Conductor grips shall not be used on wire rope unless designed for this application.”

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

RUD VWBG-V Load ring, UNC thread with variable length

RUD VWBG-V Load ring, UNC thread with variable length

Product Features: Large WLL range 0.3 t – 5 t Clear indication of the minimum WLL for all loading directions. Higher WLL by optimised attachment or application Rotatable 90° to the bolt-on direction under rated WLL Variable bolt lengths available for use in threaded...

RUD VWBG-V Load ring, UNC thread with variable length

RUD VWBG-V Load ring, UNC thread

Product Features: Large WLL range 0.3 t – 5 t Clear indication of the minimum WLL for all loading directions. Higher WLL by optimised attachment or application Rotatable 90° to the bolt-on direction under rated WLL Variable bolt lengths available for use in threaded...